Windshield Wipers and Washer

Refer to the Settings section in the Mazda Connect Owner's Manual.‌

Lane-Change Signals

Move the lever halfway toward the direction of the lane change―until the indicator flashes― and hold it there. It will return to the off position when released.

Three-Flash Turn Signal

After releasing the turn signal lever, the turn signal indicator flashes 3 times. The operation can be canceled by moving the lever in the direction opposite to which it was operated.

NOTE

The three-flash turn signal function can be switched to operable/inoperable using the personalization function.

Refer to the Settings section in the Mazda Connect Owner's Manual.


image

Windshield Wipers and Washer

Windshield Wipers and Washer

Windshield Wipers and Washer

The ignition must be switched ON to use the wipers.



image

WARNING

WARNING

WARNING

Use only windshield washer fluid or plain water in the reservoir:

Using radiator antifreeze as washer fluid is dangerous. If sprayed on the windshield, it will dirty the windshield, affect your visibility, and could result in an accident.

Only use windshield washer fluid mixed with anti-freeze protection in freezing weather conditions:

Using windshield washer fluid without anti-freeze protection in freezing weather conditions is dangerous as it could freeze on the windshield and block your vision

image

image

CAUTION

CAUTION

CAUTION

which could cause an accident. In addition, make sure the windshield is sufficiently warmed using the defroster before spraying the washer fluid.


- When the wipers are not used during freezing temperatures or for a long time, the wiper rubber may adhere to the glass. If the wipers are operated while adhered to the glass, it could damage the wiper rubber and motor.

- If the wipers are operated while the glass is dry, the glass could be scratched and the wiper rubber damaged. When the glass is dry, spray washer fluid before operating the wipers.

image


Switch Posi‐ tion

Wiper operation

OFF

Stop

INT

Intermittent

LO

Low speed

HI

High speed

Switch Posi‐ tion

Wiper operation

OFF

Stop

INT

Intermittent

LO

Low speed

HI

High speed

Switch Posi‐ tion

Wiper operation

OFF

Stop

INT

Intermittent

LO

Low speed

HI

High speed

- If the amount of washer fluid spray is insufficient, do not use the washer switch. If the washer switch continues to be operated with no washer fluid being sprayed, it could lead to pump damage.


NOTE

If the windshield wipers are operated under cold weather conditions or during snowfall, they could stop due to accumulated snow on the windshield. If the windshield wipers stop due to accumulated snow on the windshield, park the vehicle in a safe place, turn the wiper switch off, and then remove the accumulated snow. If the wiper switch is turned to another position other than OFF, the wipers will operate. If the wipers do not operate even though the wiper switch is turned to a position other than OFF, consult an Authorized Mazda Dealer as soon as possible.

Windshield Wipers

Turn the wipers on by pressing the lever up or down.

image

image

image

image

image

image

image

image

image

image

image

image

image

Switch Posi‐ tion

Wiper operation

MIST

Operation while pulling up lever

OFF

Stop

AUTO

Auto control

LO

Low speed

HI

High speed

Switch Posi‐ tion

Wiper operation

MIST

Operation while pulling up lever

OFF

Stop

AUTO

Auto control

LO

Low speed

HI

High speed

Switch Posi‐ tion

Wiper operation

MIST

Operation while pulling up lever

OFF

Stop

AUTO

Auto control

LO

Low speed

HI

High speed

Switch Posi‐ tion

Wiper operation

MIST

Operation while pulling up lever

Switch Posi‐ tion

Wiper operation

MIST

Operation while pulling up lever

Switch Posi‐ tion

Wiper operation

MIST

Operation while pulling up lever

With intermittent wiper


Variable-speed intermittent wipers

Set the lever to the intermittent position and choose the interval timing by rotating the ring.


image image

INT ring

image

With auto-wiper control


image


image


image


image


image


image

image


Auto-wiper control*

When the wiper lever is in the AUTO position, the rain sensor senses the amount of rainfall on the windshield and turns the wipers on or off automatically (off―intermittent―low speed―high speed).


The sensitivity of the rain sensor can be adjusted by turning the switch on the wiper lever.

From the center position (normal), rotate the switch upward for higher sensitivity (faster response) or rotate it downward for less sensitivity (slower response).


image

CAUTION

CAUTION

CAUTION

- Do not shade the rain sensor by adhering a sticker or a label on the windshield. Otherwise the rain sensor will not operate correctly.



image

Switch

Less sensitivity


image


image

image

Center position


image

Higher sensitivity


- When the ignition is switched ON and the wiper lever is in the AUTO position, the windshield wipers may operate automatically in the following cases:

image

- The area of the windshield above the rain sensor is touched or wiped with a cloth.

- The windshield or the rain sensor area in the cabin is hit.

When the ignition is switched ON and the wiper lever is in the AUTO position, do not touch the windshield or the windshield wipers Otherwise, the windshield wipers will operate automatically which could catch your fingers or damage the windshield wipers. When removing ice or snow, or cleaning the windshield, always make sure the wiper lever is in the OFF position.


*Some models. 4-81


NOTE

- Switching the auto-wiper lever from the OFF to the AUTO position while driving activates the windshield wipers once, after which they operate according to the rainfall amount.

- The auto-wiper control may not operate when the rain sensor temperature is about 10 °C (14 °F) or lower, or about 85 °C (185 °F) or higher.

- If the windshield is coated with water repellent, the rain sensor may not be able to sense the amount of rainfall correctly and the auto-wiper control may not operate properly.

- If dirt or foreign matter (such as ice or matter containing salt water) adheres to the windshield above the rain sensor, or if the windshield is iced, it could cause the wipers to move automatically. However, if the wipers cannot remove this ice, dirt or foreign matter, the

auto-wiper control will stop operation. In this case, set the wiper lever to the low speed position or high speed position for manual operation, or remove the ice, dirt or foreign matter by hand to restore the auto-wiper operation.

- If the auto-wiper lever is left in the AUTO position, the wipers could operate automatically from the effect of strong light sources, electromagnetic waves, or infrared light because the rain sensor uses an optical sensor. It is recommended that the auto-wiper lever be switched to the OFF position other than when driving the vehicle under rainy conditions.

- (With auto-wiper control (Except Canada))

If the headlight switch and the windshield wiper switch are in AUTO, and the wipers are operated at low or high speed by the auto wiper control for several seconds, bad weather conditions are determined and the headlights may be turned on.

- The auto-wiper control functions can be turned off. Refer to the Settings section in the Mazda Connect Owner's Manual.

Windshield Washer

Pull the lever toward you and hold it to spray washer fluid.


image

Washer

Washer

Washer

OFF


NOTE

If the windshield washer is turned on when the windshield wipers are not operating, the windshield wipers operate a few times.

If the washer does not work, inspect the fluid level (page 6-24). If the fluid level is normal, consult an Authorized Mazda Dealer.

image



image

Rear Window Wiper and Washer

Rear Window Wiper and Washer

Rear Window Wiper and Washer

Turn and Lane-Change Signals

(Page 94)

Fog Lights* ‌‌The fog lights can be turned on with the ignition switched ON and the headlights turned on.Use this switch to turn o...

Rear Window Wiper and Washer

(Page 96)

The ignition must be switched ON to use the wiper.‌‌▼ Rear Window WiperTurn the wiper on by turning the rear wiper/washer switch.Switch Posi

We also have owner's manuals for other vehicle years:

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car Mazda CX-5 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!