Child-Restraint System Suitability for Various Seat Positions Table

(Mexico)‌

Provided information in the table shows your child-restraint system suitability for various seating position. For installation suitability of other manufacturer child-restraint system, carefully consult the manufacturer's instructions which accompany the child-restraint system.

When installing a child-restraint system, the following points must be observed:

- Always remove the head restraint before installing a child-restraint system. However, when installing a backless booster seat, always install the vehicle head restraint to the seat where the backless booster seat is installed. In addition, always use a tether strap and attach it securely. Refer to Head Restraints on page 2-20.

- When installing a child-restraint system to the front passenger seat, adjust the seat slide position as far back as possible. Adjust the seat bottom to the highest position so that the seat belt can securely fasten the child-restraint system.

Refer to Adjusting the Front Passenger's Seat on page 2-13.

- When it is difficult to install a child-restraint system to the front passenger seat, or the seat belt cannot be secured to the child-restraint system, perform the following operations to adjust the seat holding the child-restraint system so that the seat belt can be secured completely to it.

- Move the seat forward or back.

- Move the seatback forward or back.

- Move the seat upward or downward. (Vehicles with height adjustment function)

- When installing a child-restraint system to the rear seat, adjust the front seat position so that the front seat does not contact the child-restraint system.

Refer to Adjusting the Driver's Seat on page 2-5.

Refer to Adjusting the Front Passenger's Seat on page 2-13.

- When installing a child-restraint system came equipped with a tether, remove the head restraint.

Refer to Head Restraints on page 2-20.

- An i-Size child-restraint system refers to a child-restraint system which has acquired i-Size category certification for the UN-R 129 regulation.

When installing a child-restraint system to the rear seat, refer to the child-restraint system manufacturer's instructions and the Using ISOFIX Lower Anchor on page 2-52.


Seating position

Passenger

Rear (Left)

Rear (Center)

Rear (Right)

Seating position suit‐ able for universal belted (Yes/No)


No


Yes (U)


No


Yes (U)


Seating position

Passenger

Rear (Left)

Rear (Center)

Rear (Right)

i-Size seating posi‐ tion (Yes/No)

No

Yes (i-U)

No

Yes (i-U)

Largest suitable rear‐ ward facing fixture (R1)


No


Yes (IL)


No


Yes (IL)

Largest suitable rear‐ ward facing fixture (R2)


No


Yes (IL)


No


Yes (IL)

Largest suitable rear‐ ward facing fixture (R2X)


No


Yes (IL)


No


Yes (IL)

Largest suitable rear‐ ward facing fixture (R3)


No


Yes (IL)


No


Yes (IL)

Largest suitable for‐ ward facing fixture (F2)


No


Yes (IUF)


No


Yes (IUF)

Largest suitable for‐ ward facing fixture (F2X)


No


Yes (IUF)


No


Yes (IUF)

Largest suitable for‐ ward facing fixture (F3)


No


Yes (IUF)


No


Yes (IUF)

Largest suitable lat‐ eral facing fixture (L1)


No


No


No


No

Largest suitable lat‐ eral facing fixture (L2)


No


No


No


No

Largest suitable booster fixture (B2)

No

Yes (IUF)

No

Yes (IUF)

Largest suitable booster fixture (B3)

No

Yes (IUF)

No

Yes (IUF)

Non i-size compati‐ ble with a support leg (Yes/No)


Yes*1


Yes


No


Yes

Lower ISOFIX an‐ chorages but without Top Tether (Yes/No)


No


No


No


No

U = Suitable for “universal” category restraints approved for use in this mass group.

UF = Suitable for forward-facing “universal” category restraints approved for use in this mass group.

IUF = Suitable for ISOFIX forward child restraints systems of universal category approved for use in the mass group.


L = Suitable for particular child restraints given on attached list. These restraints may be of the “specific vehicle”, “restricted” or “semi-universal” categories.

IL = Suitable for particular ISOFIX child restraint systems (CRS) given in the attached list. These ISOFIX CRS are those of the “specific vehicle”, “restricted” or “semi-universal” categories.

i-U = Suitable for i-Size “universal” Child Restraint Systems forward and rearward facing. i-UF = Suitable for forward-facing i-Size “universal” Child Restraint Systems only.

Yes = Child-restraint system can be secured on the seat.

No = Child-restraint system cannot be secured on the seat, or there is no fixture. X = Child-restraint system cannot be installed.

*1 Child restraint system can only be installed in the forward-facing position.

A Mazda genuine child-restraint system can be installed. Regarding child-restraint systems which can be installed, refer to the accessories catalog.

(Except Mexico)

- Regarding child-restraint systems which can be installed to your Mazda, consult an Authorized Mazda Dealer.

- A child-restraint system with a support leg cannot be installed on the rear center seat position.

- Please comply with the legal regulations concerning the use of child-restraint systems in your country.

- For the CRS which do not carry the ISO/XX size class identification (A to G), for the applicable mass group, the child seat manufacturer shall indicate the vehicle specific LATCH child-restraint systems recommended for each position.



image

Installing Child-Restraint Systems

Installing Child-Restraint Systems

Installing Child-Restraint Systems

Child-Restraint System Installation

(Page 30)

Child-Restraint System Installation ‌▼ Categories of Child-Restraint SystemsNOTEWhen purchasing, ask the manufacturer of the child-...

Installing Child-Restraint Systems

(Page 32)

Accident statistics reveal that a child is safer in the rear seat. The front passenger's seat is clearly the worst choice for any child under 12,

We also have owner's manuals for other vehicle years:

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car Mazda CX-5 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!