Wireless Charger (Qi)

Wireless Charger (Qi)*

You can charge mobile devices such as Smartphones which comply with the Qi Wireless Charging standard.

image

Power button

Power button

Power button

Charging area

Charging area

Charging area

LED indicator

LED indicator

LED indicator

Only use mobile devices that have a maximum power consumption of 5 W, or 15 W or below. The maximum power consumption differs depending on the mobile device.



image

WARNING

WARNING

WARNING

Radio waves from the Wireless Charger (Qi) may affect the operation of medical devices such as implanted-type cardiac pacemakers or defibrillators.

- Before using the Wireless Charger (Qi) near people who use medical devices, ask the medical device manufacturer or your physician if radio waves from the Wireless Charger (Qi) will affect the device.

- The Wireless Charger (Qi) can be disabled to prevent it from affecting medical devices. Consult an Authorized Mazda Dealer for details.

Heed the following

CAUTION

s. Otherwise, the Wireless Charger (Qi) may malfunction or be damaged, which could cause a fire, burns due to heat generation, or an accident such as electrical shock.

- Do not install, remove, disassemble, or change the wiring of the Wireless Charger (Qi). If the Wireless Charger (Qi) needs to be installed or removed, consult an Authorized Mazda Dealer.

- Do not use the Wireless Charger (Qi) when it is malfunctioning. In addition, if smoke, abnormal noise, or abnormal smell is emitted from the Wireless Charger (Qi), stop the vehicle in a safe place, switch the ignition OFF, and consult an Authorized Mazda Dealer.

- When using the Wireless Charger (Qi) to store items on, turn off the Wireless Charger (Qi).

- Do not place any metal object between the charging area and the mobile device. Also, do not apply items such as a metallic sticker to the Wireless Charger (Qi).


*Some models. 5-63


- When charging, do not place any item other than the mobile device to be charged on the Wireless Charger (Qi). In addition, do not place any metal object, IC card, coin, or magnetic item near the charging area.

- Remove dust or dirt from the charging area before use.

- Do not apply strong force or impact to the Wireless Charger (Qi) or get it wet.

- Use only mobile devices which support the Wireless Charger (Qi).


How to use

1. Start the engine.

2. The power for the Wireless Charger (Qi) turns on and the LED indicator turns on.

- The power can be turned on/off by pressing the power button on the Wireless Charger (Qi) for about 3 seconds.

- When the power is turned off, the LED indicator turns off.

3. Place a device compliant with the Qi Wireless Charging standard in the center of the charging area on the tray.

- The LED indicator turns on in amber or green when charging starts.

- For details on the LED indicator, refer to the following LED indicator table.

- Charging starts when all the doors and liftgate are closed.

- The function to reduce noise on the radio operates if the power button is pressed for about 1 second during charging. Use it when noise occurs on the radio due to interference by

the Wireless Charger (Qi). Press the power button again for about 1 second to cancel the function.


LED indicator

The status of the Wireless Charger (Qi) can be checked using the LED indicator.


Status

Illumination/flash pattern

OFF

Does not turn on

Stand-by (charging is pos‐ sible)

Turns on in white

Normal charging

Turns on in amber

Fast charging*1

Turns on in green

Normal charging (charging efficiency is low)

Flashes in amber

Fast charging*1 (charging efficiency is low)

Flashes in green

Stand-by (charging is not possible)

Flashes in white

Charging is stopped due to high temperature or foreign matter detected


Flashes in red

Charging is stopped due to internal problem or mal‐ function


Turns on in red

image

CAUTION

CAUTION

CAUTION

*1 Some mobile devices can switch between normal charging and fast charging.



- While a mobile device is placed on the charging area, keep the vehicle key away from the Wireless Charger (Qi). The vehicle key may not be detected due to radio wave interference by the Wireless Charger (Qi).

image


- Charging may not operate normally under the following conditions:

- The mobile device is fully charged.

- There is foreign matter between the mobile device and the charging area.

- The temperature of the mobile device is high.

- The mobile device is placed with the charging side facing upward.

- The mobile device is placed in a position extremely deviating from the center of the charging area.

- Your vehicle is in an area where strong radio waves or electrical noise occur such as near a television tower, power plant, or airport.

- The Near Field Communication (NFC) function setting of the mobile device is on (depends on the model of the mobile device).

- Keep the following items away from the charging area. Otherwise the data stored on the mobile device could be erased or the device could malfunction.

- Magnetic items such as magnets, magnetic cards, and magnetic recording media.

- High precision devices such as wristwatches.

- Before using the Wireless Charger (Qi), make sure to back up the data stored on the mobile device. The data on the mobile device could be deleted.

- Do not wipe the Wireless Charger (Qi) using oil, alcohol, or thinner, or spray hairspray or insecticide onto it. Otherwise, it could cause damage or cracking.

- Do not leave mobile devices in the cabin. The temperature inside the cabin may become very hot, causing the devices to malfunction.


image

NOTE

- A mobile device larger than the charging area cannot be charged. In addition, even if the mobile device is in the charging area, the charging efficiency may decrease or charging may not be possible depending on where the mobile device is placed.

- If the function to reduce noise on the radio is used, fast charging may be disabled depending on the mobile device being charged.

- If the LED indicator is flashing in amber or green, the charging efficiency is low. Check that there is no foreign matter between the mobile device and the charging area, and position the mobile device near the center of the charging area.

- Depending on the mobile device case or accessories used, the mobile device may not charge, or the charging efficiency may be reduced resulting in a longer charging time. If charging does not start even when a mobile device is placed on the charging area, remove the mobile device case or any accessories.

- While the keyless entry is operating, charging may stop temporarily, however, this does not indicate a problem.

- During charging, the Wireless Charger (Qi) and the mobile device become warm, however, this does not indicate a problem.


5-65


USB Power Outlet

(Page 160)

USB Power Outlet* ‌The USB power outlets can be used regardless of whether the ignition is switched to ACC or ON.USB power outletUSB power o...

Cup Holder

(Page 162)

- If the mobile device temperature rises during charging, charging may stop due to the protection function of the device. If that happens, wait until

We also have owner's manuals for other vehicle years:

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car Mazda CX-5 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!