Cruise Control

Cruise Control*

image

WARNING

WARNING

WARNING

With cruise control, you can set and automatically maintain any speed of more than about 25 km/h (16 mph).



Do not use the cruise control under the following conditions:

Using the cruise control under the following conditions is dangerous and could result in loss of vehicle control.

- Hilly terrain

- Steep inclines

- Heavy or unsteady traffic

- Slippery or winding roads

- Similar restrictions that require inconsistent speed

image

RESUME/+ switch

RESUME/+ switch

RESUME/+ switch

ON switch

ON switch

ON switch

SET/- switch

SET/- switch

SET/- switch

OFF/CANCEL switch

OFF/CANCEL switch

OFF/CANCEL switch

▼ Cruise Control Switch



NOTE

If your Mazda has the following steering switch, your Mazda is equipped with the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) system.


image

switch


switch

switch


switch

switch


switch

SET+ switch RES switch SET- switch

SET+ switch RES switch SET- switch

SET+ switch RES switch SET- switch

MODE switch

MODE switch

MODE switch

CANCEL switch OFF switch

CANCEL switch OFF switch

CANCEL switch OFF switch

Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) on page 4-145.


▼ Cruise Main Indication (White)/ Cruise Set Indication (Green)


image


The indication has 2 colors.

Cruise Main Indication (White)

The indication turns on (white) when the cruise control system is activated.

Cruise Set Indication (Green)

The indication turns on (green) when a cruising speed has been set.

image

WARNING

WARNING

WARNING

▼ Activation/Deactivation



Always turn off the cruise control system when it is not in use:

Leaving the cruise control system in an activation-ready state while the cruise control is not in use is dangerous as the cruise control could unexpectedly activate if the activation button is accidentally pressed, and result in loss of vehicle control and an accident.


image

NOTE

When the ignition is switched OFF, the system status before it was turned off is maintained. For example, if the ignition is switched OFF with the cruise control system operable, the system will be operable when the ignition is switched ON the next time.

Activation

To activate the system, press the ON switch. The cruise main indication (white) turns on.

Deactivation

To deactivate the system, press the OFF/ CANCEL switch.

The cruise main indication (white) turns off.


▼ To Set Speed

1. Activate the cruise control system by pressing the ON switch. The cruise main indication (white) turns on.

2. Accelerate to the desired speed, which must be more than 25 km/h (16 mph).

image

image

3. Set the cruise control by pressing the SET/ switch at the desired speed. The cruise control is set at the moment the SET/ switch is pressed. Release the accelerator pedal simultaneously. The cruise set indication (green) turns on.

NOTE

- The cruise control speed setting cannot be performed under the following conditions:

- The selector lever is in the P or N position.

- The parking brake is applied.

image

image

- Release the SET/ or RESUME/ switch at the desired speed, otherwise

image

image

the speed will continue increasing while the RESUME/ switch is pressed and held, and continue decreasing while the SET/ switch is pressed and held (except when the accelerator pedal is depressed).

- On a steep grade, the vehicle may momentarily slow down while ascending or speed up while descending.

- The cruise control will cancel if the vehicle speed decreases below 21 km/h (13 mph) when the cruise control is activated, such as when climbing a steep grade.

- The cruise control may cancel at about 15 km/h (9 mph) below the preset speed, such as when climbing a long, steep grade.

The vehicle speed preset using the cruise control is displayed in the instrument cluster and the active driving display (vehicles with active driving display).

image

*1

*1

*1

Instrument Cluster Type A

*1: Needle indicates set speed.

Type B Type C

image image image


Active Driving Display


image image


▼ To Increase Cruising Speed

Follow either of these procedures.

To increase speed using cruise control switch

image

Press the RESUME/ switch and hold it. Your vehicle will accelerate. Release the switch at the desired speed.


image

Press the RESUME/ switch and release it immediately to adjust the preset speed. Multiple operations will increase the preset speed according to the number of times it is operated.

image


image

Increasing speed with a single RESUME/ switch operation

Instrument cluster display for vehicle speed indicated in km/h: 1 km/h (0.6 mph) Instrument cluster display for vehicle speed indicated in mph: 1 mph (1.6 km/h)

To increase speed using accelerator pedal

image

Depress the accelerator pedal to accelerate to the desired speed. Press the SET/ switch and release it immediately.

NOTE

Accelerate if you want to speed up temporarily when the cruise control is on. Greater speed will not interfere with or change the set speed. Take your foot off the accelerator to return to the set speed.

▼ To Decrease Cruising Speed

image

Press the SET/ switch and hold it. The vehicle will gradually slow.

Release the switch at the desired speed.


image

Press the SET/ switch and release it immediately to adjust the preset speed. Multiple operations will decrease the preset speed according to the number of times it is operated.

image

Decreasing speed with a single SET/ switch operation

Instrument cluster display for vehicle speed indicated in km/h: 1 km/h (0.6 mph) Instrument cluster display for vehicle speed indicated in mph: 1 mph (1.6 km/h)

▼ To Resume Cruising Speed at More Than 25 km/h (16 mph)

If the cruise control system temporarily canceled (such as by applying the brake

pedal) and the system is still activated, the most recent set speed will automatically resume when the RESUME/ switch is pressed.

image

image

If vehicle speed is below 25 km/h (16 mph), increase the vehicle speed up to 25 km/h (16 mph) or more and press the RESUME/ switch.

▼ To Temporarily Cancel

To temporarily cancel the system, use one of these methods:

- Slightly depress the brake pedal.

- Press the OFF/CANCEL switch.

image

If the RESUME/ switch is pressed when the vehicle speed is 25 km/h (16 mph) or higher, the system reverts to the previously set speed.

NOTE

- If any of the following conditions occur, the cruise control system is temporarily canceled.

- The parking brake is applied.

- The selector lever is in the P or N position.

- When the cruise control system is temporarily canceled by even one of the applicable cancel conditions, the speed cannot be re-set.

- The cruise control cannot be cancelled while driving in manual mode (selector lever shifted from D to M position). Therefore, engine braking will not be applied even if the transaxle is shifted down to a lower gear. If deceleration is required, lower the set speed or depress the brake pedal.

image


image

▼ To Deactivate

When a cruising speed has been set (cruise set indication (green) turns on)

Long-press the OFF/CANCEL switch or press the OFF/CANCEL switch 2 times.

image

When a cruising speed has not been set (cruise main indication (white) turns on)

Press the OFF/CANCEL switch.


Front Camera/Side Cameras/Rear Camera

(Page 136)

Front Camera/Side Cameras/Rear Camera* ‌Your vehicle is equipped with a front camera, side cameras, and a rear camera. The 360° View Mon...

Tire Pressure Monitoring System

(Page 138)

Tire Pressure Monitoring System ‌The Tire Pressure Monitoring System (TPMS) monitors the pressure for each tire.If tire pressure i

We also have owner's manuals for other vehicle years:

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car Mazda CX-5 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!