Instrument Cluster (Type B)

Instrument Cluster (Type B)



image

Speedometer. page 4-30

Tachometer page 4-30

Multi-information Display (Type B). page 4-31

Dashboard Illumination. page 4-35

Speedometer

The speedometer indicates the speed of the vehicle.

Tachometer

image

CAUTION

The tachometer shows engine speed in thousands of revolutions per minute (rpm).


Do not run the engine with the tachometer needle in the RED ZONE.

This may cause severe engine damage.


image

*1

STRIPED

ZONE


*1

RED ZONE


*1 The range varies depending on the type of gauge.

NOTE

image

When the tachometer needle enters the STRIPED ZONE, this indicates to the driver that the gears should be shifted before entering the RED ZONE.


Multi-information Display (Type B)

Multi-information Display (Type B)


INFO switch

image image

The multi-information display indicates the following information.

- Odometer

- Trip meter

- Engine coolant temperature gauge

- Fuel gauge

- Outside temperature

- Distance-to-empty

- Average fuel economy

- Current fuel economy

- Maintenance Monitor (Except SKYACTIV-D 2.2)

- Remaining Diesel Exhaust Fluid (DEF) and Maximum Driving Distance Display (SKYACTIV-D 2.2)

- Blind Spot Monitoring (BSM) Display

- Distance Recognition Support System (DRSS) Display

- Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) System Display

- Lane Departure WARNING System (LDWS) Display

- Lane-keep Assist System (LAS) & Lane Departure WARNING System (LDWS) Display

- Cruise Control Display

- Compass Display

- Message Display


The screen content changes each time the INFO switch is pressed.

Press the INFO switch


Current Fuel Economy, Trip Meter A, Average Fuel Economy, Outside Temperature, Odometer, Fuel Gauge


*3


image

WARNING message, Outside Temperature, Odometer, Fuel Gauge



image

image

Press the INFO switch Press the INFO switch


image

Current Fuel Economy, Trip Meter B, Average Fuel Economy, Outside Temperature, Odometer, Fuel Gauge

Engine Coolant Temperature Gauge, Compass,

image

Distance-to-empty, Outside Temperature, Odometer, Fuel Gauge


image

image

image

image

*1 Press the INFO switch Press the INFO switch


Engine Coolant Temperature Gauge, Maintenance Monitor, Outside Temperature, Odometer, Fuel Gauge


i-ACTIVSENSE display, Outside Temperature, Odometer, Fuel Gauge


*2


Engine Coolant Temperature Gauge, Remaining Diesel Exhaust Fluid (DEF), Maximum Driving Distance Display, Outside Temperature, Odometer, Fuel Gauge


Press the INFO switch


*1: Except SKYACTIV-D 2.2

*2: SKYACTIV-D 2.2

*3: Displayed only when a WARNING occurs.


Odometer, Trip Meter and Trip Meter Selector

image

INFO switch

INFO switch

INFO switch

The odometer is constantly displayed on the screen when the ignition is switched ON, and the TRIP A or TRIP B screen can be displayed by operating the INFO switch.



image

image

image

image

image

image

Odometer, Trip meter A


image

image

image

image

image

image

image

image

Press the INFO switch image Odometer,

image

Trip meter B


image


Odometer

The odometer records the total distance the vehicle has been driven.

Trip meter

The driving distance for a specified interval is indicated. Two types (TRIP A, TRIP B) of interval distance and the average fuel economy for each can be measured.


For instance, trip meter A can record the distance from the point of origin, and trip

meter B can record the distance from where the fuel tank is filled.


When trip meter A is selected, TRIP A will be displayed. When trip meter B is selected, TRIP B will be displayed.


The trip meter and average fuel economy can be reset by pressing the INFO switch for 1.5 seconds or more while in each mode.

NOTE

- Only the trip meters record tenths of kilometers (miles).

- The trip record will be erased when:

- The power supply is interrupted (blown fuse or the battery is disconnected).

- The vehicle is driven over 9999.9 km (mile).

Engine Coolant Temperature Gauge

Displays the engine coolant temperature. The blue range of the gauge indicates that the engine coolant temperature is low, and the red range of the gauge indicates that the engine coolant temperature is high and overheating.


image

image



image

CAUTION

If the high engine coolant temperature WARNING light (red) flashes, there is a possibility of overheating. Drive slowly to reduce engine load until you can find a safe place to stop the vehicle and wait for the engine to cool down.

Refer to Overheating on page 7-18.


NOTE

- (SKYACTIV-G 2.5T, SKYACTIV-D 2.2)

If the engine coolant temperature is high or the engine is hot, the engine output may be limited.

- The temperature unit (Centigrade/ Fahrenheit) of the engine coolant gauge display changes in conjunction with the temperature unit of the outside temperature display.

Refer to Personalization Features on page 9-11.

- During normal driving, the engine coolant temperature stabilizes at 100 °C (210 °F) or less, and the gauge indicates a range lower than 100 °C (210 °F).

Fuel Gauge

The fuel gauge shows approximately how much fuel is remaining in the tank when

the ignition is switched ON. We recommend keeping the tank over 1/4 full.


Full


image


image

image

image

image

image

1/4 Full


image


image

image

image

image

Empty


image

image

image

image

image

If the fuel level is low, ( ) and ( ) turn an amber color. Refuel as soon as possible.

If inconsistency in engine performance or stalling occurs due to low fuel level conditions, refuel the vehicle as soon as possible and add at least 10 L (2.7 US gal, 2.2 Imp gal) of fuel.

Refer to Taking Action on page 7-33.

NOTE

- After refueling, it may require some time for the indicator to stabilize. In addition, the indicator may deviate while driving on a slope or curve since the fuel moves in the tank.

image

- The direction of the arrow ( ) indicates that the fuel-filler lid is on the left side of the vehicle.

image


Dashboard Illumination

(Without auto-light control)

When the lights are turned on with the ignition switched ON, the brightness of the dashboard illumination is dimmed. (With auto-light control)

When the lights are turned on with the ignition switched ON, the brightness of the dashboard illumination is dimmed. However, when the light sensor detects that the surrounding area is bright such as when the lights are turned on in the daytime, the dashboard illumination does not dim.

NOTE

- (With auto-light control)

When the ignition is switched ON in the early evening or at dusk, the dashboard illumination is dimmed for several seconds until the light sensor detects the brightness of the surrounding area, however, the dimming may cancel after the brightness is detected.

- When the lights are turned on, the lights-on indicator light in the instrument cluster turns on.

Refer to Headlights on page 4-75.

The brightness of the instrument cluster and dashboard illuminations can be adjusted by rotating the knob.

- The brightness decreases by rotating the knob to the left. A beep sound will be heard when the knob has been rotated to the maximum dim position.

- The brightness increases by rotating the knob to the right.


image

Dim

Dim

Dim

Bright

Bright

Bright

Function for canceling illumination dimmer

The illumination dimmer can be canceled by rotating the dashboard illumination knob to the right until a beep sound is heard while the instrument cluster is dimmed with the ignition switched ON. If the instrument cluster's visibility is reduced due to glare from surrounding brightness, cancel the illumination dimmer.

NOTE

- The illumination dimmer can be canceled by pressing the dashboard illumination knob.

- When the illumination dimmer is canceled, the instrument cluster cannot be dimmed even if the lights are turned on.

- When the illumination dimmer is canceled, the screen in the center display switches to constant display of the daytime screen.

image


Outside Temperature Display

When the ignition is switched ON, the outside temperature is displayed.


image


image image

NOTE

- Under the following conditions, the outside temperature display may differ from the actual outside temperature depending on the surroundings and vehicle conditions:

- Significantly cold or hot temperatures.

- Sudden changes in outside temperature.

- The vehicle is parked.

- The vehicle is driven at low speeds.

Changing the Temperature Unit of the Outside Temperature Display

The outside temperature unit can be switched between Celsius and Fahrenheit. Settings can be changed by operating the center display screen.

Refer to Personalization Features on page 9-11.

NOTE

When the temperature unit indicated in the outside temperature display is changed, the temperature unit indicated in the engine coolant gauge display changes in conjunction with it.

Distance-to-empty

This displays the approximate distance you can travel on the remaining fuel based on the fuel economy.

The distance-to-empty will be calculated and displayed every second.


image


image image image image

NOTE

- Even though the distance-to-empty display may indicate a sufficient amount of remaining driving distance before refueling is required, refuel as soon as possible if the fuel level is very low or the low fuel WARNING light illuminates.

- The display will not change unless you add more than approximately 9 L (2.3 US gal, 1.9 Imp gal) of fuel.

- The distance-to-empty is the approximate remaining distance the vehicle can be driven until all the graduation marks in the fuel gauge indicating the remaining fuel supply disappear.

- If there is no past fuel economy information such as after first purchasing your vehicle or the information is deleted when the battery cables are disconnected, the actual distance-to empty/range may differ from the amount indicated.

Average Fuel Economy

The average fuel economy is calculated every minute from the total traveled distance on the trip meter and the total fuel consumption, and the average fuel

image


image

image

image

economy for either TRIP A or TRIP B is displayed.


image



image image

The average fuel economy and trip meters can be reset by pressing the INFO switch for 1.5 seconds or more while in each mode. After the data is cleared, the fuel consumption is recalculated and the - - - km/L (- - - mpg) for the 1 minute prior to it being displayed is indicated.

Current Fuel Economy

This displays the current fuel economy by calculating the amount of fuel consumption and the distance traveled.


image


NOTE

Indicates the 0 position when the vehicle speed is about 5 km/h (3 mph) or slower.

Maintenance Monitor (Except SKYACTIV-D 2.2)

The following maintenance period notifications can be displayed by turning the Maintenance Monitor on.

- Scheduled Maintenance

- Tire Rotation

- Oil Change

When the remaining days to the maintenance period is 15 days or less, or

the remaining distance is 1,000 km (600 miles) or shorter, a message is indicated when the ignition is switched ON.

image


image


image image

For the setting method and indications for the maintenance monitor, refer to the Maintenance Monitor.

Refer to Maintenance Monitor on page 6-16.

Remaining Diesel Exhaust Fluid (DEF) and Maximum Driving Distance Display (SKYACTIV-D 2.2)

The remaining amount of DEF and the remaining-distance-to-empty indications are displayed when the ignition is switched ON.

image


image image


image

image

image

image

image

If the remaining amount of DEF is low or there is a problem with the Selective Catalytic Reduction (SCR) system and there is less maximum remaining driving distance, the remaining-distance-to-empty indication is continuously displayed.


image


If the remaining amount of DEF is low or there is a problem with the SCR system, the SCR WARNING light turns on/flashes and a WARNING message is displayed.

image


Refer to Selective Catalytic Reduction (SCR) System Indications on page 4-228.

Blind Spot Monitoring (BSM) Display

Displays the system status.


image image

Refer to Blind Spot Monitoring (BSM) on page 4-128.

Lane-keep Assist System (LAS) & Lane Departure WARNING System (LDWS) Display*

Displays the system status.


image

Refer to Lane-keep Assist System (LAS) & Lane Departure WARNING System (LDWS) on page 4-162.

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Display*

Displays the currently set system status.


image

Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) on page 4-147.

Distance Recognition Support System (DRSS) Display*

Displays the distance between your vehicle and the vehicle ahead.


image


image

image

Refer to Distance Recognition Support System (DRSS) on page 4-139.

Cruise Control Set Vehicle Speed Display*

The vehicle speed preset using the cruise control is displayed.


image image

image


Refer to Cruise Control on page 4-218.

Compass Display

The direction the vehicle is moving is displayed in one of eight directions while the vehicle is being driven.


image image


image


Display

Direction

N

North

S

South

E

East

W

West

NE

Northeast

NW

Northwest

SE

Southeast

SW

Southwest

Message Display

A message such as the system operation status, a malfunction, or an abnormality is indicated.

WARNING/indicator light in instrument cluster turns on/flashes or symbol is indicated on display at same time as message

image

Check the information regarding the WARNING/indicator light or indicated symbol.

Refer to If a WARNING Indication/WARNING Lights on page 4-40.

Refer to If a Indication/Indicator Lights on page 4-42.

Message only is indicated on display

Follow the instructions indicated on the display. For the display content, refer to the next page.

Refer to If a Message Indicated on

Multi-information Display on page 7-39.


WARNING/Indicator Lights

Instrument Cluster varies depending on model and specifications.

Instrument Cluster

image


Center of Dashboard


image


image


WARNING lights will appear in any of the highlighted areas


WARNING Indication/WARNING Lights

These lights turn on or flash to notify the user of the system operation status or a system malfunction.


Signal

WARNING

Page


image

Brake System WARNING Indication/WARNING Light*1*2

7-23



image image


ABS WARNING Light*1

Electronic Brake Force Distribu- tion System WARNING

7-23

ABS WARNING 7-26


image

Charging System WARNING Indication/WARNING Light*1

7-23


image

Engine Oil WARNING Light*1

7-23


image

(Red)


High Engine Coolant Temperature WARNING Light*1


7-23


image

Power Steering Malfunction Indication

7-23


Signal

WARNING

Page


image

Master WARNING Indication/WARNING Light

7-26


image

Electric Parking Brake (EPB) WARNING Indication/WARNING Light*1

7-26


image

Check Engine Light*1

7-26


image

*Selective Catalytic Reduction (SCR) system WARNING Indication/WARNING Light*1

7-26


image

Automatic Transaxle WARNING Indication

7-26


image

*AWD WARNING Indication

7-26


image

Air Bag/Front Seat Belt Pretensioner System WARNING Light*1

7-26


image


*Tire Pressure Monitoring System WARNING Light*1

Flashing 7-26

Turns on 7-33


image

(Amber/White)


KEY WARNING Indication

Amber 7-26

White 7-33


image

(Amber)


*High Beam Control System (HBC) WARNING Indication/WARNING Light*1


7-26


image

*Blind Spot Monitoring (BSM) WARNING Indication

7-26


image

(Amber)

*Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) WARNING Indication


7-26



image


*Lane-keep Assist System (LAS) & Lane Departure WARNING System (LDWS) WARNING Indication

7-26


image

LED Headlight WARNING Light*1

7-26


image

*Smart Brake Support/Smart City Brake Support (SBS/SCBS) WARNING In- dication


7-33


image

Low Fuel WARNING Indication

7-33


image

Check Fuel Cap WARNING Indication/WARNING Light*1

7-33


Signal

WARNING

Page


image

Engine Oil Level WARNING Light*1

7-33


image image

Seat Belt WARNING Light (Front seat)

7-33


image image image

(Red)


Seat Belt WARNING Light (Rear seat)


7-33


image

*Low Washer Fluid Level WARNING Indication

7-33


image


Door-Ajar WARNING Indication


7-33


image


Liftgate-Ajar WARNING Indication


7-33

*1 The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an Authorized Mazda Dealer.

*2 The light turns on continuously when the parking brake is applied.

Indication/Indicator Lights

These lights turn on or flash to notify the user of the system operation status or a system malfunction.


Signal

Indicator

Page


image image image

(Green)


Seat Belt Indicator Light (Rear seat)


2-30


image image

*Front Passenger Air Bag Deactivation Indicator Light*1

2-71


image

Security Indicator Light*1

3-48


image

Wrench Indication

4-45


image

(Blue)


Low Engine Coolant Temperature Indicator Light


4-45


image

*Glow Indicator Light*1

4-45


Signal

Indicator

Page


image

*Diesel Particulate Filter Indication

4-227


image


Shift Position Indication


4-66


image

Lights-On Indication/Indicator Light

4-75


image


Headlight High-Beam Indicator Light

Headlight High-Low Beam

4-78

Flashing the Headlights 4-78



image image


Turn Signal/Hazard WARNING Indicator Lights

Turn and Lane-Change Signals

4-81

Hazard WARNING Flasher

4-89


image

AUTOHOLD Active Indicator Light*1

4-103

*Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) indicator Light

4-158


image


TCS/DSC Indicator Light*1

Traction Control System (TCS)

4-108

Dynamic Stabil- ity Control (DSC)

4-110

Turns on 7-26


image


*TCS OFF Indicator Light*1


4-108


image


*Off-Road Traction Assist Indicator Light*1


4-111


image

Select Mode Indication

4-117


image

(Green)


*High Beam Control System (HBC) Indicator Light


4-126


Signal

Indicator

Page


image


*Blind Spot Monitoring (BSM) OFF Indicator Light*1

Malfunction 7-26

Except malfunc- tion

4-132


image

(White)

*Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Main Indication


4-152


image

(Green)

*Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Set Indication


4-152


image image

*Lane-keep Assist System (LAS) & Lane Departure WARNING System (LDWS) Indication

4-164


image

*Lane-keep Assist System (LAS) & Lane Departure WARNING System (LDWS) OFF Indicator Light*1

4-169


image


*Smart City Brake Support (SCBS) Indication

Advanced Smart City Brake Sup- port (Advanced SCBS)

4-174

Smart City Brake Support (SCBS)

4-177


image


*Smart Brake Support/Smart City Brake Support (SBS/SCBS) OFF Indica- tor Light*1

Advanced Smart City Brake Sup- port (Advanced SCBS)

4-174

Smart City Brake Support (SCBS)

4-177

Smart Brake Support (SBS) System

4-180


image

(White)


*Cruise Main Indication


4-219


image

(Green)


*Cruise Set Indication


4-219


*1 The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an Authorized Mazda Dealer.

Wrench Indication


image

The wrench indication is displayed under the following conditions.

- When the preset maintenance period has arrived.

Refer to Maintenance Monitor on page 6-16.

- When the engine oil replacement period has arrived.

- (SKYACTIV-D 2.2)

- When the engine oil is deteriorated or exceeds the specified amount.

- When fuel filter (sedimentor) draining is required. Consult an Authorized Mazda Dealer.


NOTE

- The wrench indication may display earlier than the preset period depending on vehicle usage conditions.

- Whenever the engine oil is replaced, a reset of the vehicle engine control unit is necessary.

Refer to Maintenance Monitor on page 6-16.


image

Low Engine Coolant Temperature Indicator Light (Blue)

The light illuminates continuously when the engine coolant temperature is low and turns off after the engine is warm.

image

Glow Indicator Light (SKYACTIV-D 2.2)



image


When the ignition is switched ON, the glow indicator light turns on. The glow indicator light turns off when preheating is finished.


The maintenance period for the glow plug or a problem in the system may be indicated under the following conditions. Have your vehicle inspected by an Authorized Mazda Dealer.

- The glow indicator light does not turn on when the ignition is switched ON or it remains on.

- The glow indicator light is flashing.


NOTE

If the vehicle is left with the ignition switched ON without starting the engine and a long period of time has elapsed since preheating finished, the preheating may be performed again and the glow indicator light may turn on.


Instrument Cluster (Type A)

(Page 80)

Instrument Cluster (Type A) ① Speedometer. page 4-13② Tachometer. ...

Instrument Cluster (Type C)

(Page 82)

Instrument Cluster (Type C) ① Speedometer. page 4-46② Tachometer p

We also have owner's manuals for other vehicle years:

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car Mazda CX-5 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!