Message Indicated on Multi-information Display

Message Indicated on Multi-information Display*

If there is a notification from the vehicle, a message is displayed in the multi-information display. Check the information and take the necessary action.


(Display example)

image

Type B

Type B

Type B

Instrument Cluster Type A

If the WARNING light turns on/flashes simultaneously or a symbol is indicated in the display, check the information regarding the WARNING light or symbol.

Refer to If a WARNING Light Turns On or Flashes on page 7-23.


Display

Content

Action to be taken


image

Indicated when the push button start is pressed while the selector lever is not in the P position.


Shift the selector lever to the P position.


image

Indicated when the push button start is pressed without depressing the brake pedal.

Depress the brake pedal and press the push button start.


image

Indicated when the push button start is pressed without depressing the clutch pedal.

Depress the clutch pedal and press the push button start.


image

Indicates when the Electric Parking Brake (EPB) switch is operated without depressing the brake pedal.

Operate the Electric Parking Brake (EPB) switch while depressing the brake pedal.



image

Indicates when there is a problem with the brake related system while the vehi- cle is being held in a stop position by the AUTOHOLD function or during the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) stop hold control.

Depress the brake pedal.

Cancel the AUTOHOLD function or the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function), and have your vehicle inspect- ed at an Authorized Mazda Dealer.


Display

Content

Action to be taken



image

Indicates the possibility of the vehicle not being held in the stopped position by the AUTOHOLD function or the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go func- tion) stop hold control, such as on steep slopes.


Depress and hold your foot on the brake pedal.


image

Indicates when the cancel operation is done without depressing the brake pedal while the vehicle is being held in the stopped position by the AUTOHOLD function.


Cancel the AUTOHOLD function stop hold control while depressing the brake pedal.


image

Indicated when the engine coolant tem- perature is high or the engine is hot, and the engine output is limited.

Drive slowly and make sure that the in- dication turns off.

If the indication does not turn off, con- sult an Authorized Mazda Dealer.


image


Indicated when the engine speed in- creases because the engine is being cleaned internally.

The engine speed will increase while the engine is running an internal cleaning cycle with the selector lever in the P or N position. Do not stop the engine while the engine speed is high. When the cleaning cycle is completed, the engine speed will return to normal.


If a Warning Light Turns On or Flashes

(Page 224)

If a Warning Light Turns On or Flashes ‌If any warning light turns on/flashes, take appropriate action for each light. There is no pro...

Message Indicated on Display

(Page 226)

Message Indicated on Display* If a message is displayed in the center display, take appropriate action (in a calm manner) according

We also have owner's manuals for other vehicle years:

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car Mazda CX-5 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!