AUX/USB

AUX/USB

Audio can be heard from the vehicle's speakers by connecting a commercially-available portable audio unit to the auxiliary jack.

A commercially-available, non-impedance (3.5image) stereo mini plug cable is required. Contact an Authorized Mazda Dealer for details.

In addition, audio can be played from the vehicle audio device by connecting a USB device to the USB port.

NOTE

The SD card slot is for the navigation system. For vehicles with the navigation system, the SD card (Mazda genuine) with stored map data is inserted into the SD card slot and used.


image

WARNING

Do not adjust the portable audio unit or a similar product while driving the vehicle: Adjusting the portable audio unit or a similar product while driving the vehicle is dangerous as it could distract your attention from the vehicle operation which could lead to a serious accident. Always adjust the portable audio unit or a similar product while the vehicle is stopped.


image

CAUTION

Depending on the portable audio device, noise may occur when the device is connected to the vehicle accessory socket. (If noise occurs, do not use the accessory socket.)



USB port


Auxiliary jack

NOTE

- This mode may not be usable depending on the portable audio device to be connected.

- Before using the auxiliary jack/USB port, refer to the instruction manual for the portable audio device.

- Use a commercially-available,

image

How to use AUX mode. page 5-35

How to use USB mode. page 5-36

How to use Apple CarPlay™ ................

. page 5-41

How to use Android Auto™ mode. page 5-44

non-impedance (3.5image) stereo mini plug for connecting the portable audio unit to the auxiliary jack. Before using the auxiliary jack, read the manufacturer's instructions for connecting a portable audio unit to the auxiliary jack.

- To prevent discharging of the battery, do not use the auxiliary input for long periods with the engine off or idling.

image


- When connecting a device to the auxiliary jack or USB port, noise may occur depending on the connected device. If the device is connected to the vehicle's accessory socket, the noise can be reduced by unplugging it from the accessory socket.

image

USB port

USB port

USB port

Auxiliary jack

Auxiliary jack

Auxiliary jack

Some models.

Some models.

Some models.

How to connect USB port/Auxiliary jack



Connecting a device

1. Open the console lid.

2. Connect the connector on the device to the USB port.

Connecting with a connector cable

1. Open the console lid.

2. Connect the device plug/connector cable to the auxiliary jack/USB port. Pass the device plug/connector cable through the notch in the console and connect.


image

WARNING

Do not allow the connection plug cord to get tangled with the shift lever (manual transaxle)/selector lever (automatic transaxle):

image

CAUTION

Allowing the plug cord to become tangled with the shift lever (manual transaxle)/ selector lever (automatic transaxle) is dangerous as it could interfere with driving, resulting in an accident.


Do not place objects or apply force to the auxiliary jack/USB port with the plug connected.


NOTE

- Insert the plug into the auxiliary jack/USB port securely.

- Insert or pull out the plug with the plug perpendicular to the auxiliary jack/USB port hole.

- Insert or remove the plug by holding its base.

- (Vehicles with USB port indicated with

image

)

Use the USB terminal indicated by the image mark when using Apple CarPlay™ and Android Auto™.

image


image

Audio Control Switch

(Page 147)

Audio Control Switch ‌▼ Adjusting the VolumeTo increase the volume, press up the volume switch ( ).To decrease the volume, press down the volu...

Antenna

(Page 149)

Antenna Antenna  

We also have owner's manuals for other vehicle years:

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car Mazda CX-5 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!