Warning/Indicator Lights

WARNING/Indicator Lights

Type A


image

WARNING/Indicator lights will appear in any of the highlighted areas


(Display example)

Displays as follows:



image


Master WARNING light


Master WARNING light


Master WARNING light

Indication in display and master WARNING light in instrument cluster are illuminated at same time

This indicates a malfunction with the vehicle system. Check the message indicated in the display and consult an Authorized Mazda Dealer. For details, refer to the explanations for the WARNING/indicator lights, in the WARNING/indicator lights section, which match the symbol in the upper part of the display. If a message is not indicated in the display, operate the INFO switch to display the β€œWARNING” screen.

Multi-information display

A message such as the system operation status, a malfunction, or an abnormality is indicated.

β€’ (When a symbol and message are indicated in the display)

For details on the symbols indicated in the upper part of the screen, check the indication and method for taking action list.


β€’ (When only a message is indicated in the display)

Follow the instructions indicated in the display.

If any of the content in the following illustrations is indicated, there may be a problem with the vehicle. The method for taking action differs depending on the indication.

Check the following illustrations below.

Action: Park the vehicle immediately, view the symbol indicated in the upper part of the screen and then refer to the β€œIndication and method for taking action list” containing the symbol to see what action should be taken.


Indication on display


image


image


image


image


image


Action: Consult an Authorized Mazda Dealer to have your vehicle inspected. View the symbol indicated in the upper part of the screen and refer to the β€œIndication and method for taking action list” containing the symbol to see what action should be taken.


Indication on display


image


image


image


image


image


image

Indication on display

Indication on display

Indication on display

Action: Consult an Authorized Mazda Dealer to have your vehicle inspected.


Indication and method for taking action list


Signal

WARNING/Indicator Lights

Page


image


Master WARNING Light


4-28


image


Brake System WARNING Light


4-28


image


ABS WARNING Light


4-29


image


Charging System WARNING Indication


4-30


image


Engine Oil WARNING Indication


4-30


image


Check Engine Light


4-31


image


High Engine Coolant Temperature WARNING Light (Red)


4-31


image


AWD WARNING Indication


4-32


image


BSM OFF Indicator Light


4-43


image


Automatic Transaxle WARNING Indication


4-32


image


Power Steering Malfunction Indication


4-33


image


Air Bag/Front Seat Belt Pretensioner System WARNING Light


4-33


image


Low Fuel WARNING Light


4-34


image


Check Fuel Cap WARNING Indication


4-34


image


Seat Belt WARNING Light


4-34


Signal

WARNING/Indicator Lights

Page


image


Door-Ajar WARNING Indication


4-35


image


Liftgate-Ajar WARNING Indication


4-36


image


Low Washer Fluid Level WARNING Indication


4-36


image


Tire Pressure Monitoring System WARNING Light


4-36


image


KEY WARNING Indication


4-38


image


Wrench Indication


4-40


image


TCS/DSC Indicator Light


4-40


image


image


TCS OFF Indicator Light


4-40


image


AFS OFF Indicator Light


4-40


image


Smart City Brake Support (SCBS) OFF Indicator Light


4-41


image


Low Engine Coolant Temperature Indicator Light (Blue)


4-41


image


Shift Position Indication


4-41


image


Headlight High-Beam Indicator Light


4-42


image image


Turn Signal/Hazard WARNING Indicator Lights


4-42


Signal

WARNING/Indicator Lights

Page


image


Security Indicator Light


4-42


image


Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green)


4-42


image


Lights-On Indicator Light


4-43


Type B


image

WARNING/Indicator lights will appear in any of the highlighted areas


Signal

WARNING/Indicator Lights

Page


image


Master WARNING Light


4-28


image


Brake System WARNING Light


4-28


image


ABS WARNING Light


4-29


image


Charging System WARNING Light


4-30


image


Engine Oil WARNING Light


4-30


image


Check Engine Light


4-31


image


High Engine Coolant Temperature WARNING Light (Red)


4-31


Signal

WARNING/Indicator Lights

Page


image


AWD WARNING Light


4-32


image


BSM OFF Indicator Light


4-43


image


Automatic Transaxle WARNING Light


4-32


image


Power Steering Malfunction Indicator Light


4-33


image


Air Bag/Front Seat Belt Pretensioner System WARNING Light


4-33


image


Low Fuel WARNING Light


4-34


image


Check Fuel Cap WARNING Light


4-34


image


Seat Belt WARNING Light


4-34


image


Door-Ajar WARNING Light


4-35


image


Low Washer Fluid Level WARNING Light


4-36


image


Tire Pressure Monitoring System WARNING Light


4-36


image


KEY WARNING Light


4-38


image


TCS/DSC Indicator Light


4-40


image


image


TCS OFF Indicator Light


4-40


image


AFS OFF Indicator Light


4-40


image


Low Engine Coolant Temperature Indicator Light (Blue)


4-41


Signal

WARNING/Indicator Lights

Page


image


Shift Position Indication


4-41


image


Headlight High-Beam Indicator Light


4-42


image image


Turn Signal/Hazard WARNING Indicator Lights


4-42


image


Security Indicator Light


4-42


image


Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green)


4-42


image


Lights-On Indicator Light


4-43


Master WARNING Light


image


This WARNING light stays on for a few seconds when the ignition is switched ON.


Type A

Displays when notification of the system malfunctions is required.

Check the message indicated in the display and consult an Authorized Mazda Dealer.

Type B

The light illuminates continuously if any one of the following occurs. Consult an Authorized Mazda Dealer.

β€’ There is a malfunction in the battery management system.

β€’ There is a malfunction in the brake switch.


image

Brake System WARNING Light


image

This WARNING has the following functions:

Parking brake WARNING/WARNING light inspection

The light illuminates when the parking brake is applied with the ignition switched to START or ON. It turns off when the parking brake is fully released.


Low brake fluid level WARNING

image

WARNING

WARNING

WARNING

If the brake WARNING light remains illuminated even though the parking brake is released, the brake fluid may be low or there could be a problem with the brake system. Park the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.


Do not drive with the brake system WARNING light illuminated. Contact an Authorized Mazda Dealer to have the brakes inspected as soon as possible:

image

CAUTION

CAUTION

CAUTION

Driving with the brake system WARNING light illuminated is dangerous. It indicates that your brakes may not work at all or that they could completely fail at any time. If this light remains illuminated, after checking that the parking brake is fully released, have the brakes inspected immediately.


In addition, the effectiveness of the braking may diminish so you may need to depress the brake pedal more strongly than normal to stop the vehicle.


ABS WARNING Light


image


The WARNING light stays on for a few seconds when the ignition is switched ON.

If the ABS WARNING light stays on while you're driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS.

Should this happen, consult an Authorized Mazda Dealer as soon as possible.

NOTE

When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS WARNING light may illuminate. If this occurs, it is the result of the weak battery and does not indicate an ABS malfunction.

Recharge the battery.


Electronic Brake Force Distribution System WARNING


image image


If the electronic brake force distribution control unit determines that some components are operating incorrectly, the control unit may illuminate the brake system WARNING light and the ABS WARNING light simultaneously. The problem is likely to be the electronic brake force distribution system.

image


image

WARNING

WARNING

WARNING

image

CAUTION

CAUTION

CAUTION

Do not drive with both the ABS WARNING light and brake WARNING light illuminated. Have the vehicle towed to an Authorized Mazda Dealer to have the brakes inspected as soon as possible:

Driving when the brake system WARNING light and ABS WARNING light are illuminated simultaneously is dangerous.

When both lights are illuminated, the rear wheels could lock more quickly in an emergency stop than under normal circumstances.


Charging System WARNING Indication/WARNING Light


image


Type B

This WARNING light illuminates when the ignition is switched ON and turns off when the engine is started.


Type A/Type B

If the WARNING light/indication illuminates while driving, it indicates a malfunction of the alternator or of the charging system. Drive to the side of the road and park off the right-of-way. Consult an Authorized Mazda Dealer.

Do not continue driving when the charging system WARNING light is illuminated because the engine could stop unexpectedly.


Engine Oil WARNING Indication/ WARNING Light



image


Type B

This WARNING light illuminates when the ignition is switched ON and turns off when the engine is started.


Type A/Type B

image

CAUTION

CAUTION

CAUTION

This WARNING light/WARNING indication indicates low engine oil pressure.


Do not run the engine if the oil pressure is low. Otherwise, it could result in extensive engine damage.

If the light illuminates or the WARNING indication is displayed while driving:

1. Drive to the side of the road and park off the right-of-way on level ground.

2. Turn off the engine and wait 5 minutes for the oil to drain back into the oil pan.

3. Inspect the engine oil level (page 6-22). If it's low, add the appropriate amount of engine oil while being careful not to overfill.

image



image

CAUTION

CAUTION

CAUTION

Do not run the engine if the oil level is low. Otherwise, it could result in extensive engine damage.

4. Start the engine and check the WARNING light/WARNING indication.

If the light/indication remains illuminated even though the oil level is normal or after adding oil, stop the engine immediately and have your vehicle towed to an Authorized Mazda Dealer.


Check Engine Light


image


This indicator light illuminates when the ignition is switched ON and turns off when the engine is started.


If this light illuminates while driving, the vehicle may have a problem. It is important to

NOTE

the driving conditions when the light illuminated and consult an Authorized Mazda Dealer.


The check engine light may illuminate in the following cases:

β€’ The fuel tank level being very low or approaching empty.

β€’ The engine's electrical system has a problem.

β€’ The emission control system has a problem.

β€’ (U.S.A. and Canada)

The fuel-filler cap is missing or not tightened securely.

If the check engine light remains on, do not drive at high speeds and consult an Authorized Mazda Dealer as soon as possible.


High Engine Coolant Temperature WARNING Light (Red)


image


When the ignition is switched ON, the light illuminates momentarily and then turns off.


The light flashes when the engine coolant temperature is extremely high, and illuminates when the engine coolant temperature increases further.

Handling Procedure Flashing light

Drive slowly to reduce engine load until

you can find a safe place to stop the vehicle and wait for the engine to cool down.

Illuminated light

image

CAUTION

CAUTION

CAUTION

This indicates the possibility of overheating. Park the vehicle in a safe place immediately and stop the engine. Refer to Overheating (page 7-18).


Do not drive the vehicle with the high engine coolant temperature WARNING light illuminated. Otherwise, it could result in damage to the engine.

image


qAWD WARNING Indication/ WARNING LightΓ­



image


Type A

The WARNING indication will display under the following conditions;

β€’ There is an abnormality with the AWD system.

β€’ There is too much difference in tire radius between the front and rear wheels.

β€’ The differential oil temperature is abnormally high.

β€’ There is a continuous large difference between front and rear wheel rotation, such as when trying to pull away from an icy surface or when trying to remove the vehicle from mud, sand or similar conditions.

When β€œ4WD system inspection required” is indicated

Contact an Authorized Mazda Dealer.

When β€œStop vehicle at safe area” is indicated

Park the vehicle in a safe place. After a few moments, if the indication disappears, you can resume driving. If the indication does not disappear, contact an Authorized Mazda Dealer.

Type B

The WARNING light will illuminate or flash under the following conditions:

β€’ Illuminates when there is an abnormality with the AWD system.

β€’ Illuminates if there is too much difference in tire radius between the front and rear wheels.

β€’ Flashes when the differential oil temperature is abnormally high.

β€’ Flashes when there is a continuous large difference between front and rear wheel rotation, such as when trying to pull away from an icy surface or when trying to remove the vehicle from mud, sand or similar conditions.

When illuminated

If the AWD WARNING light illuminates, contact an Authorized Mazda Dealer.

When flashing

Park the vehicle in a safe place. After a few moments, if the WARNING light stops flashing, you can resume driving. If the light does not stop flashing, contact an Authorized Mazda Dealer.


Automatic Transaxle WARNING Indication/WARNING Light


image


Type B

This WARNING light stays on for a few seconds when the ignition is switched ON.


Type A/Type B

The light/indication illuminates when the transaxle has a problem.

image



image

CAUTION

CAUTION

CAUTION

If the automatic transaxle WARNING light/WARNING indication illuminates, the transaxle has an electrical problem. Continuing to drive your Mazda in this condition could cause damage to your transaxle. Consult an Authorized Mazda Dealer as soon as possible.


image

image

Power Steering Malfunction WARNING Indication/Indicator Light


image

Type B

This indicator light illuminates when the ignition is switched ON, and turns off when the engine is started.


Type A/Type B

The power steering malfunction indicator light/WARNING indication illuminates or flashes if there is a malfunction with the power steering while the engine is running.

If the indicator light/WARNING indication illuminates or flashes, park the vehicle in a safe place immediately and stop the engine.

If the indicator light/WARNING indication does not turn off even if the engine is restarted afterwards, consult an Authorized Mazda Dealer.

NOTE

β€’ If the indicator light/WARNING indication illuminates or flashes, the power steering will not operate normally. If this happens, the steering wheel can still be operated, however, the operation may feel heavy compared to normal, and the steering wheel could vibrate when turning.

β€’ Repeatedly jerking the steering wheel left and right while the vehicle is stopped or moving extremely slowly will cause the power steering system to go into protective mode which will make the steering feel heavy, but this does not indicate a problem. If this occurs, park the vehicle safely and wait several minutes for the system to return to normal.


Air Bag/Front Seat Belt Pretensioner System WARNING Light


image


If the air bag/front seat belt pretensioner system is working properly, the WARNING light illuminates when the ignition is switched ON or after the engine is cranked. The WARNING light turns off after a specified period of time.


A system malfunction is indicated if the WARNING light constantly flashes, constantly illuminates or does not illuminate at all when the ignition is switched ON. If any of these occur, consult an Authorized Mazda Dealer as soon as possible. The system may not operate in an accident.

image



image

WARNING

WARNING

WARNING

Never tamper with the air bag/ pretensioner systems and always have an Authorized Mazda Dealer perform all servicing and repairs:

Self-servicing or tampering with the systems is dangerous. An air bag/ pretensioner could accidentally activate or become disabled causing serious injury or death.


Low Fuel WARNING Light



image


This WARNING light signals that the fuel tank will soon be empty.

Refuel as soon as possible.


Check Fuel Cap WARNING Indication/Indicator LightΓ­


image


Type B

This WARNING light illuminates for a few seconds when the ignition is switched ON.

Type A/Type B

If the check fuel cap WARNING light illuminates/indication while driving, the fuel-filler cap may not be installed properly. Stop the engine and reinstall the fuel-filler cap.

Refer to Fuel-Filler Cap on page 3-24.


Seat Belt WARNING Light

Driver's seat


image


Front passenger's seatΓ­


image

With WARNING light for front passenger's seat

The seat belt WARNING light illuminates if the driver or front passenger's seat is occupied and the seat belt is not fastened with the ignition switched ON.

image


Without WARNING light for front passenger's seat

The seat belt WARNING light illuminates if the driver's seat is occupied and the seat belt is not fastened with the ignition switched ON.


Seat belt reminder

NOTE

Consult an Authorized Mazda Dealer to deactivate or restore the belt reminder. Though the belt reminder can be deactivated, doing so will defeat the purpose of the system to warn the driver and the front passenger in the event that their seat belts are not fastened. For the safety of the driver and front passenger, Mazda recommends not deactivating the belt reminder.

Front seat

If the vehicle is driven with the driver or front passenger's seat belt unfastened, the seat belt WARNING light illuminates and a WARNING beep sounds.

NOTE

Some models do not have the seat belt reminder function for the front passenger's seat.

If the driver or front passenger's seat belt is unfastened (only when the front passenger seat is occupied) and the vehicle is driven at a speed faster than about 20 km/h (12 mph), the WARNING light will flash and a beep sound will be heard. After a short time, the WARNING light stops flashing, but remains illuminated, and the beep sound stops.


Until a seat belt is fastened or a given period of time has elapsed, the beep sound will not stop even if the vehicle speed falls below 20 km/h (12 mph).

NOTE

β€’ The WARNING light flashes and a beep sound will be heard for about 6 seconds if the driver's seat belt is not fastened when the ignition is switched ON.

β€’ If a driver or front passenger's seat belt is unfastened after the beep sound turns off (WARNING light remains illuminated), and the vehicle speed exceeds 20 km/h (12 mph), the WARNING light flashes and beep sound activates again.

β€’ Placing heavy items on the front passenger seat may cause the front passenger seat belt WARNING function to operate depending on the weight of the item.

β€’ To allow the front passenger seat weight sensor to function properly, do not place and sit on an additional seat cushion on the front passenger seat. The sensor may not function properly because the additional seat cushion could cause sensor interference.

β€’ When a small child sits on the front passenger seat, it is possible that the WARNING light will not operate.


Door-Ajar WARNING Indication/ WARNING Light

image

Type A


Type B

image

image


Type A

This WARNING indication illuminates when any door is not securely closed.

Close the door securely before driving the vehicle.

Type B

This WARNING light illuminates when any door or the liftgate is not securely closed. Close the door or the liftgate securely before driving the vehicle.


Liftgate-Ajar WARNING Indication (Type A instrument cluster)Γ­


image

This WARNING indication is illuminated when the liftgate is not securely closed. Close the liftgate securely before driving the vehicle.


Low Washer Fluid Level WARNING Indication/WARNING LightΓ­


image


This WARNING light indicates that little washer fluid remains. Add fluid (page 6-25).

Tire Pressure Monitoring System WARNING Light


image


This WARNING light illuminates for a few seconds when the ignition is switched ON.


The WARNING light illuminates and a beep is heard when tire pressure is too low in one or more tires, and flashes when there is a system malfunction.

image



image

WARNING

WARNING

WARNING

If the tire pressure monitoring system WARNING light illuminates or flashes, or the tire pressure WARNING beep sound is heard, decrease vehicle speed immediately and avoid sudden maneuvering and braking:

If the tire pressure monitoring system WARNING light illuminates or flashes, or the tire pressure WARNING beep sound is heard, it is dangerous to drive the vehicle at high speeds, or perform sudden maneuvering or braking. Vehicle drivability could worsen and result in an accident.

To determine if you have a slow leak or a flat, pull over to a safe position where you can check the visual condition of the tire and determine if you have enough air to proceed to a place where air may be added and the system monitored again by an Authorized Mazda Dealer or a tire repair station.

Do not ignore the TPMS WARNING Light: Ignoring the TPMS WARNING light is dangerous, even if you know why it is illuminated. Have the problem taken care of as soon as possible before it develops into a more serious situation that could lead to tire failure and a dangerous accident.

WARNING light illuminates/WARNING beep sounds

When the WARNING light illuminates, and the WARNING beep sound is heard (about 3 seconds), tire pressure is too low in one or more tires.

Adjust the tire pressure to the correct tire pressure and initialize TPMS. Refer to the specification charts (page 9-8).

NOTE

β€’ Perform tire pressure adjustment when the tires are cold. Tire pressure will vary according to the tire temperature, therefore let the vehicle stand for 1 hour or only drive it 1.6 km (1 mile) or less before adjusting the tire pressures. When pressure is adjusted on hot tires to the cold inflation pressure, the TPMS WARNING light/beep may turn on after the tires cool and pressure drops below specification.

Also, an illuminated TPMS WARNING light, resulting from the tire air pressure dropping due to cold ambient temperature will remain illuminated even if the ambient temperature rises. In this case, it will also be necessary to adjust the tire air pressures. If the TPMS WARNING light illuminates due to a drop in tire air pressure, make sure to check and adjust the tire air pressures.

β€’ Tires lose air naturally over time and the TPMS cannot tell if the tires are getting too soft over time or you have a flat. However, when you find one low tire in a set of four- that is an indication of trouble; you should have someone drive the vehicle slowly forward so you can inspect any low tire for cuts and any metal objects sticking through tread or sidewall. Put a few drops of water in the valve stem to see if it bubbles indicating a bad valve. Leaks need to be addressed by more than simply reinflating the tire as leaks are dangerous - take it to an Authorized Mazda Dealer.

If the WARNING light illuminates again even after the tire pressures are adjusted and the TPMS initialization is performed, there may be a tire puncture. Replace the punctured tire with the temporary spare tire (page 7-7).

image


WARNING light flashes

If the tire pressure monitoring system has a malfunction, the tire pressure WARNING light flashes for about 1 minute when the ignition is switched ON and then continues illuminating. Have your vehicle checked by an Authorized Mazda Dealer as soon as possible.


KEY WARNING Light (Red)/KEY Indicator Light (Green)


image


Type A

β€œKeyless System Inspection Required” is displayed

This message is displayed if the advanced keyless entry & push button start system has a problem.

image

CAUTION

CAUTION

CAUTION

Contact an Authorized Mazda Dealer.


If the above message is indicated, or the push button start indicator light (amber) flashes, the engine may not start. If the engine cannot be started, try starting it using the emergency operation for starting the engine, and have the vehicle inspected at an Authorized Mazda Dealer as soon as possible.

Refer to Emergency Operation for Starting the Engine on page 4-8.

β€œSet Power to OFF” is displayed

This message is displayed when the driver's door is opened without switching the ignition off.

β€œKey not found” is displayed

This message is displayed when any of the following operations is performed with the key out of the operational range or placed in areas inside the cabin where it is difficult for the key to be detected.

β€’ The push button start is pressed with the ignition switched off

β€’ The ignition is switched on

β€’ The driver's door is opened or all doors are closed without switching the ignition off

β€œDepress the Brake Pedal and Touch the Key to the Start Button” (Automatic Transaxle vehicle)/β€œDepress the Clutch Pedal and Touch the Key to the Start Button” (Manual Transaxle vehicle) is displayed

This message is displayed when any of the following operations is performed with the key out of the operational range or placed in areas inside the cabin where it is difficult for the key to be detected.

β€’ The push button start is pressed with the ignition switched off

β€’ Brake pedal (Automatic transaxle vehicle)/Clutch pedal (Manual transaxle vehicle) is depressed with the ignition switched off

β€œKey Battery is low” is displayed

This message is displayed when the remaining battery power of the key is low and the ignition is switched from on to off.

image


NOTE

Because the key utilizes low-intensity radio waves, the Key Removed From Vehicle WARNING may activate if the key is carried together with a metal object or it is placed in a poor signal reception area.

Type B

This indicator has two colors.

KEY WARNING Light (Red) When illuminated

image

CAUTION

CAUTION

CAUTION

If any malfunction occurs in the keyless entry system, it illuminates continuously.


If the key WARNING indicator light illuminates or the push button start indicator light (amber) flashes, the engine may not start. If the engine cannot be started, try starting it using the emergency operation for starting the engine, and have the vehicle inspected at an Authorized Mazda Dealer as soon as possible. Refer to Emergency Operation for Starting the Engine on page 4-8.

When flashing

β€’ Under the following conditions, the KEY WARNING light (red) flashes to notify the driver that the ignition cannot be switched from off.

β€’ The key battery is dead.

β€’ The key is not within operational range.

β€’ The key is placed in areas where it is difficult for the system to detect the signal (page 3-6).

β€’ A key from another manufacturer similar to the key is in the operational range.

β€’ Under the following conditions, the KEY WARNING light (red) will flash continuously when the ignition has not been switched off to notify the driver that the key has been removed from the vehicle. The KEY WARNING light (red) will stop flashing when the key is back inside the vehicle:

The ignition has not been switched off and all the doors and the liftgate are closed after removing the key from the vehicle.

NOTE

Because the key utilizes low-intensity radio waves, the Key Removed From Vehicle WARNING may activate if the key is carried together with a metal object or it is placed in a poor signal reception area.

KEY Indicator Light (Green) When illuminated

When the brake pedal is depressed with an automatic transaxle or the clutch pedal is depressed with a manual transaxle, the system confirms that the correct key is inside the vehicle, the KEY indicator light (green) illuminates, and the engine can be started (page 4-3).

When flashing

When the ignition is switched from ON to off, the KEY indicator light (green) flashes for approximately 30 seconds indicating that the remaining battery power is low. Replace with a new battery before the key becomes unusable.

Refer to Replace Electrical Battery on page 6-33.

image


qWrench IndicationΓ­



image


Perform maintenance in accordance with the message.


TCS/DSC Indicator Light


image


This indicator light stays on for a few seconds when the ignition is switched ON. If the TCS or DSC is operating, the indicator light flashes.


If the light stays on, the TCS, DSC or the brake assist system may have a malfunction and they may not operate correctly. Take your vehicle to an Authorized Mazda Dealer.

NOTE

β€’ In addition to the indicator light flashing, a slight lugging sound will come from the engine. This indicates that the TCS/DSC is operating properly.

β€’ On slippery surfaces, such as fresh snow, it will be impossible to achieve high rpm when the TCS is on.

TCS OFF Indicator Light


image


image


This indicator light stays on for a few seconds when the ignition is switched ON.

It also illuminates when the TCS OFF switch is pressed and TCS is switched off. Refer to TCS OFF Switch on page 4-84.


If the light remains illuminated and the TCS is not switched off, take your vehicle to an Authorized Mazda Dealer. The DSC may have a malfunction.


AFS OFF Indicator LightΓ­


image


image


When illuminated

This indicator light illuminates briefly when the ignition is switched ON, and then turns off.

Pressing the AFS OFF switch cancels the AFS function and illuminates the indicator light.


When flashing

The indicator light flashes continuously if the system is malfunctioning. Consult an Authorized Mazda Dealer.

image


NOTE

β€’ Even if the AFS is not operating due to some malfunction, the normal headlight function is still operable.

β€’ If there is a malfunction with the headlight auto-leveling function, the indicator light flashes.


Smart City Brake Support (SCBS) OFF Indicator LightΓ­



image


This indicator light illuminates for a few seconds when the ignition is switched ON.

When the Smart City Brake Support (SCBS) system is turned off, the Smart City Brake Support (SCBS) OFF indicator light turns on.

Refer to Personalization Features on page 9-10.

NOTE

When the TCS OFF switch is pressed to stop the TCS operation, the Smart City Brake Support (SCBS) system operation also stops and the Smart City Brake Support (SCBS) OFF indicator light turns on.

Low Engine Coolant Temperature Indicator Light (Blue)


image


The light illuminates continuously when the engine coolant temperature is low and turns off after the engine is warm.


If the low engine coolant temperature indicator light remains illuminated after the engine has been sufficiently warmed up, the temperature sensor could have a malfunction. Consult an Authorized Mazda Dealer.


Shift Position Indication


image


This indicates the selected shift position.

Gear position indicator

In manual shift mode, the β€œM” of the shift position indicator illuminates and the numeral for the selected gear displays.

image


qHeadlight High-Beam Indicator Light


image


This light indicates one of two things:

β€’ The high-beam headlights are on.

β€’ The turn signal lever is in the flash-to- pass position.


Turn Signal/Hazard WARNING Indicator Lights


image image


When operating the turn signal lights, the left or right turn signal indicator light flashes to indicate which turn signal light is operating (page 4-60).


When operating the hazard WARNING lights, both turn signal indicator lights flash (page 4-67).


If an indicator light remains illuminated (does not flash) or if it flashes abnormally, one of the turn signal bulbs may be burned out. Consult an Authorized Mazda Dealer.

Security Indicator Light


image


This indicator light starts flashing every two seconds when the ignition is switched from ON to OFF and the immobilizer system is armed.


The light stops flashing when the ignition is switched ON with the correct key.

At this time, the immobilizer system is disarmed and the light illuminates for about three seconds and then turns off.


If the engine does not start with the correct key, and the security indicator light keeps illuminating or flashing, the system may have a malfunction. Consult an Authorized Mazda Dealer.


Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green)


image


The indicator light has two colors.

Cruise Main Indicator Light (Amber)

The indicator light illuminates amber when the ON switch is pressed and the cruise control system is activated.

image


Cruise Set Indicator Light (Green)

The indicator light illuminates green when a cruising speed has been set.


BSM OFF Indicator LightΓ­


image


This indicator light illuminates for a few seconds when the ignition is switched ON.


The BSM OFF indicator light illuminates when the BSM system is turned off by pressing the BSM OFF switch.

The indicator light flashes if the BSM system has a malfunction. Consult an Authorized Mazda Dealer.

NOTE

If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors can detect, the system may pause (The BSM OFF indicator light in the instrument panel flashes). However, it does not indicate a malfunction.


image

image

image

image

Lights-On Indicator Light



This indicator light illuminates when the exterior lights and dashboard illumination are on.

The light continues to flash if the lighting system has a malfunction. Consult an Authorized Mazda Dealer.

image


Meters and Gauges

(Page 79)

Meters and Gauges ‌‌Type AType BSpeedometer page 4-11Odometer, Trip Meter and Trip ...

Transaxle

(Page 81)

Manual Transaxle Operation ‌‌Neutral positionNeutral positionNeutral positionqManual Transaxle Shift PatternThe shift pattern of the transa

We also have owner's manuals for other vehicle years:

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car Mazda CX-5 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!