Door Locks

Door Locks ‌‌


Always take all children and pets with you or leave a responsible person with them:

Leaving a child or a pet unattended in a parked vehicle is dangerous. In hot weather, temperatures inside a vehicle can become high enough to cause brain damage or even death.

Do not leave the key in your vehicle with children and keep them in a place where your children will not find or play with them:

Leaving children in a vehicle with the key is dangerous. This could result in someone being badly injured or even killed.

Keep all doors locked when driving: Unlocked doors in a moving vehicle are dangerous. Passengers can fall out if a door is accidentally opened and can more easily be thrown out in an accident.

Always close all the windows and moonroof, lock the doors and take the key with you when leaving your vehicle unattended:

Leaving your vehicle unlocked is dangerous as children could lock themselves in a hot vehicle, which could result in death. Also, a vehicle left unlocked becomes an easy target for thieves and intruders.

After closing the doors, always verify that they are securely closed:

Doors not securely closed are dangerous, if the vehicle is driven with a door not securely closed, the door could open unexpectedly resulting in an accident.

Always confirm the safety around the vehicle before opening a door:

Suddenly opening a door is dangerous. A passing vehicle or a pedestrian could be hit and cause an accident.

image


NOTE

β€’ When the ignition is switched to ACC or ON, the vehicle lock-out prevention feature prevents you from locking yourself out of the vehicle.

All doors and the liftgate will automatically unlock if they are locked using the power door locks with any door or the liftgate open.

The vehicle lock-out prevention feature does not operate while the ignition is switched off.

When any door is opened from the outside while the key is inside the vehicle, the closed doors are locked. All the doors are automatically unlocked by closing the open door.

(With the advanced keyless function)

The beep sound is heard for about 10 seconds to notify the driver that the key has been left in the vehicle.

(Without the advanced keyless function) The horn sound is heard twice to notify the driver that the key has been left in the vehicle.

β€’ (Door unlock (control) system with collision detection)

This system automatically unlocks the doors in the event the vehicle is involved in an accident to allow passengers to get out of the vehicle immediately and prevent being trapped inside. While the ignition is switched ON and in the event the vehicle receives an impact strong enough to inflate the air bags, all the doors are automatically unlocked after about 6 seconds have elapsed from the time of the accident.

The doors may not unlock depending on how an impact is applied, the force of the impact, and other conditions of the accident.

If door-related systems or the battery is malfunctioning, the doors will not unlock.

Locking, Unlocking with Key

All doors and the liftgate lock automatically when the driver's door is locked with the key.

All doors and the liftgate unlock when the driver's door is unlocked and the key is held in the unlock position for one second or longer.

image

Lock

Lock

Lock

Unlock

Unlock

Unlock

Turn the key toward the front to lock, toward the back to unlock.


NOTE

Holding the key in the unlocked position in the driver's door lock for about a second unlocks all doors and the liftgate. To unlock only the driver's door, insert the key into the driver's door lock and turn the key briefly to the unlock position and then immediately return it to the center position.


Locking, Unlocking with Request Switch (With the advanced keyless function)

All doors and the liftgate can be locked/ unlocked by pressing the request switch on the front doors while the key is being carried.

The request switch on the liftgate can only be used to lock all doors and the liftgate.

image


image

Request switch

Request switch

Request switch

Front doors


image

Request switch

Request switch

Request switch

Liftgate (Lock only)


To lock

To lock the doors and the liftgate, press the request switch and the hazard WARNING lights will flash once.

A beep sound will be heard once.

To unlock

Driver's door request switch

To unlock the driver's door, press the request switch. A beep sound will be heard twice and the hazard WARNING lights will flash twice.

To unlock all doors and the liftgate, press the request switch again within 3 seconds and two more beep sounds will be heard.

Front passenger door request switch

To unlock all doors and the liftgate, press the request switch. A beep sound will be heard twice and the hazard WARNING lights will flash twice.

NOTE

β€’ The system can be set to unlock all doors by performing a single operation.

Refer to Personalization Features on page 9-10.

Use the following procedure to change the setting.

1. Switch the ignition off and close all of the doors and the liftgate.

2. Open the driver's door.

3. Within 30 seconds of opening the driver's door, press and hold the UNLOCK button on the key for 5 seconds or longer. The sound of the doors locking/unlocking can be heard.

After this, the system switches the setting each time the UNLOCK button is pressed (the sound of the doors locking/unlocking can be heard).

4. The setting change is completed by doing any one of the following:

β€’ Switch the ignition to ACC or ON.

β€’ Close the driver's door.

β€’ Open the liftgate.

β€’ The key is not operated for 10 seconds.

β€’ Press any button except the UNLOCK button on the key.

β€’ A request switch is pressed.

β€’ Confirm that all doors and the liftgate are securely locked.

For the liftgate, move it without pressing the electric liftgate opener to verify that the liftgate has not been left ajar.

β€’ All doors and the liftgate cannot be locked when any door or the liftgate is open.

β€’ It may require a few seconds for the doors to unlock after the request switch is pressed.

image


β€’ A beep sound is heard for confirmation when the doors and the liftgate are locked/ unlocked using the request switch. If you prefer, the beep sound can be turned off. The volume of the beep sound can also be changed.

Refer to Personalization Features on page 9-10.

Use the following procedure to change the setting.

1. Switch the ignition off and close all of the doors and the liftgate.

2. Open the driver's door.

3. Within 30 seconds of opening the driver's door, press and hold the LOCK button on the key for 5 seconds or longer.

All of the doors and the liftgate lock and the beep sound activates at the currently set volume. (If the beep sound is currently set to not activate, it will not activate.) The setting changes each time the LOCK button on the key is pressed and the beep sound activates at the set volume. (If the beep sound has been set to not activate, it will not activate.)

4. The setting change is completed by doing any one of the following:

β€’ Switch the ignition to ACC or ON.

β€’ Close the driver's door.

β€’ Open the liftgate.

β€’ The key is not operated for 10 seconds.

β€’ Press any button except the LOCK button on the key.

β€’ A request switch is pressed.

β€’ (With theft-deterrent system)

The hazard WARNING lights flash when the theft-deterrent system is armed or turned off.

Refer to Theft-Deterrent System on page 3-37.

β€’ The setting can be changed so that the doors and the liftgate are locked automatically without pressing the request switch.

Refer to Personalization Features on page 9-10.

(Auto-lock function)

A beep sound is heard when all doors and the liftgate are closed while the advanced key is being carried. All doors and the liftgate are locked automatically after about three seconds when the advanced key is out of the operational range. Also, the hazard WARNING lights flash once. (Even if the driver is in the operational range, all doors and the liftgate are locked automatically after about 30 seconds.) If you are out of the operational range before the doors and the liftgate are completely closed or another key is left in the vehicle, the auto- lock function will not work. Always make sure that all doors and the liftgate are closed and locked before leaving the vehicle. The auto-lock function does not close the power windows.

β€’ (Auto re-lock function)

After unlocking with the request switch, all doors and the liftgate will automatically lock if any of the following operations are not performed within about 60 seconds. If your vehicle has a theft-deterrent system, the hazard WARNING lights will flash for confirmation.

The time required for the doors to lock automatically can be changed.

Refer to Personalization Features on page 9-10.

β€’ A door or the liftgate is opened.

β€’ The ignition is switched to any position other than off.

image


qLocking, Unlocking with Transmitter

All doors and the liftgate can be locked/ unlocked by operating the keyless entry system transmitter, refer to Keyless Entry System (page 3-3).


Locking, Unlocking with Door- Lock Switch

All doors and the liftgate lock automatically when lock side is pressed. They all unlock when unlock side is pressed.

image

Lock

Lock

Lock

Unlock

Unlock

Unlock

Driver's door


image

Lock

Lock

Lock

Unlock

Unlock

Unlock

Front passenger's door


To lock all the doors/liftgate from an open front door, press the lock side of the door lock switch and then close the door.

NOTE

When locking the doors this way, be careful not to leave the key inside the vehicle.


image

WARNING

WARNING

WARNING

Auto Lock/Unlock Function


Do not pull the inner handle on a front door:

Pulling an inner handle on a front door while the vehicle is moving is dangerous. Passengers can fall out of the vehicle if a front door accidentally opens, which could result in death or serious injury.

β€’ When the vehicle speed exceeds 20 km/h (12 mph), all doors and the liftgate lock automatically.

β€’ When the ignition is switched off, all doors and the liftgate unlock automatically.

These functions can also be disabled so that they do not operate.

Auto lock/unlock function setting change using door-lock switch

The doors and the liftgate can set to lock or unlock automatically by selecting any one of the functions from the following table and using the driver's door-lock switch on the interior door panel to perform the setting change as indicated in the procedure which follows.

Settings can be changed using the following operation.

image


NOTE

β€’ Function number 3 is the factory setting for your vehicle.

β€’ There are only a total of five auto lock/ unlock settings available for automatic transaxle vehicles, and three for manual transaxle vehicles. Be sure to press the unlock side of the driver's door-lock switch the correct number of times according to the selected function number. If the switch is mistakenly pressed six times on an automatic transaxle vehicle or four times on a manual transaxle, the procedure will be invalidated. If this occurs, start the procedure from the beginning.


Function number

Function*1

1

The auto door-lock function is disabled.


2

All the doors and the liftgate lock automatically when the vehicle speed is about 20 km/h (12 mph) or more.


3

All the doors and the liftgate lock automatically when the vehicle speed is about 20 km/h (12 mph) or more. All the doors and the liftgate unlock when the ignition is switched from ON to Off.


4

(Automatic transaxle vehicles only) When the ignition is switched ON and the shift lever is shifted from park (P) to any other gear position, all the doors and the liftgate lock automatically.


5

(Automatic transaxle vehicles only) When the ignition is switched ON and the shift lever is shifted from park (P) to any other gear position, all the doors and the liftgate lock automatically.

When the shift lever is shifted to park

(P) while the ignition is switched ON, all the doors and the liftgate unlock automatically.

*1 Other settings for the auto door lock function are available at an Authorized Mazda Dealer. For details consult an Authorized Mazda Dealer.

Refer to Personalization Features on page 9-10.

1. Safely park the vehicle. All doors must remain closed.

2. Switch the ignition ON.

3. Press and hold the lock side of the driver's door-lock switch within 20 seconds of switching the ignition ON, and make sure a beep sound is heard about eight seconds afterwards.

4. Referring to the auto lock/unlock function setting table and determine the function number for the desired setting. Press the unlock side of the driver's door-lock switch the same number of times as the selected function number (Ex. If you select function 2, press the unlock side of the switch only 2 times).

5. Three seconds after the function setting has been changed, a beep sound will beep in the amount of the selected function number. (Ex. Function number 3 = 3 beep sounds)

image


(Manual transaxle vehicles)



Current Function Number

Current Function Number

Current Function Number

image

Press unlock side of lock switch once

(Automatic transaxle vehicles)


Current Function Number

Current Function Number

Current Function Number

image

image

Press unlock side of lock switch once


Function Number 1

Function Number 1

Function Number 1

Press lock side of


Function Number 1

Function Number 1

Function Number 1

Press 2 times


Function Number 2

Function Number 2

Function Number 2

Press 3 times


Function Number 3

Function Number 3

Function Number 3


image

Function set (The number of beeps heard is the same as the selected function number)

Function set (The number of beeps heard is the same as the selected function number)

Function set (The number of beeps heard is the same as the selected function number)

Press 4 times


Cancel setting

Cancel setting

Cancel setting

Press lock side of lock switch



Cancel setting

Cancel setting

Cancel setting


image

Function Number 3

Function Number 3

Function Number 3

Function Number 2

Function Number 2

Function Number 2

Wait for 3 second

Press 2 times


Press 3 times


Function Number 4

Function Number 4

Function Number 4

Press 4 times


Function Number 5

Function Number 5

Function Number 5

Press 5 times


image

Press 6 times

lock switch



Cancel setting

Cancel setting

Cancel setting

Wait for 3 second



Function set (The number of beeps heard is the same as the selected function number)

Function set (The number of beeps heard is the same as the selected function number)

Function set (The number of beeps heard is the same as the selected function number)


Cancel setting

Cancel setting

Cancel setting


NOTE

β€’ The doors cannot be locked or unlocked while the setting function is being performed.

β€’ The procedure can be cancelled by pressing the lock side of the driver's door-lock switch.

image


qLocking, Unlocking with Door- Lock Knob

To lock any door from the inside, press the door-lock knob.

To unlock, pull it outward.

image

Lock

Lock

Lock

Unlock

Unlock

Unlock

This does not operate the other door locks.



To lock the front passenger door with the door-lock knob from the outside, press the door-lock knob to the lock position and close the door (holding the door handle pulled is not required).

image

Door-lock knob

Door-lock knob

Door-lock knob

This does not operate the other door locks.

NOTE

When locking the door this way:

β€’ Be careful not to leave the key inside the vehicle.

β€’ The driver's door lock knob cannot be used while the driver's door is open.

image

Red indication

Red indication

Red indication

β€’ The red indication can be seen when the door-lock knob is unlocked.



image


Doors and Locks

(Page 45)

Door Locks ‌‌Always take all children and pets with you or leave a responsible person with them:Leaving a child or a pet unattende...

Liftgate

(Page 47)

qRear Door Child Safety Locks‌These locks are intended to help prevent children from accidentally opening the rear doors. Use them both whenever

We also have owner's manuals for other vehicle years:

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car Mazda CX-5 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!