Engine Oil

Engine Oil

NOTE

Changing the engine oil should be performed by an Authorized Mazda Dealer.

Refer to Introduction (page 6-2) for owner's responsibility in protecting your investment.


Recommended Oil

U.S.A. and Canada

Use SAE 0W-20 engine oil.

Mazda Genuine Oil is used in your Mazda vehicle. Mazda Genuine 0W-20 Oil is required to achieve optimum fuel economy.


For maintenance service, Mazda recommends Mazda Genuine Parts and Castrolยฎ (U.S.A. only).


image


image

(ILSAC)

Only use SAE 0W-20 oil

โ€œCertified For Gasoline Enginesโ€ by the American Petroleum Institute (API).

image

โ€“40 โ€“30 โ€“20 โ€“10 10 30 40 50

โ€“40 โ€“30 โ€“20 โ€“10 10 30 40 50

โ€“40 โ€“30 โ€“20 โ€“10 10 30 40 50

0 20

0 20

0 20

โ€“40 โ€“20 0 20 40 60 80 100 120

โ€“40 โ€“20 0 20 40 60 80 100 120

โ€“40 โ€“20 0 20 40 60 80 100 120

Oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the International Lubricant Standardization and Approval Committee (ILSAC), comprised of U.S. and Japanese automobile manufacturers.



image


Except U.S.A. and Canada Use SAE 5W-30 engine oil.

Oil container labels provide important information.

A chief contribution this type of oil makes to fuel economy is reducing the amount of fuel necessary to overcome engine friction.


image

For maintenance service, Mazda recommends Mazda Genuine Parts and Castrolยฎ (Mexico only).

image



image


(Mexico)


image

(ILSAC)

4. Pull out the dipstick, wipe it clean, and reinsert it fully.

Use SAE 5W-30 engine oil. If SAE 5W- 30 engine oil is not available, use SAE 5W-20 engine oil.


image

โ€“40 โ€“30 โ€“20 โ€“10

โ€“40 โ€“30 โ€“20 โ€“10

โ€“40 โ€“30 โ€“20 โ€“10

0 20

0 20

0 20

10 30 40 50

10 30 40 50

10 30 40 50

โ€“40 โ€“20 0 20 40 60 80 100 120

โ€“40 โ€“20 0 20 40 60 80 100 120

โ€“40 โ€“20 0 20 40 60 80 100 120

The quality designation SM, or ILSAC must be on the label.



image


Inspecting Engine Oil Level

1. Be sure the vehicle is on a level surface.

2. Warm up the engine to normal operating temperature.

3. Turn it off and wait at least 5 minutes for the oil to return to the oil pan.

5. Pull it out again and examine the level. The level is normal if it is between Low and Full.

image


Full OK

Low


Full OK

Low


Full OK

Low

image

CAUTION

CAUTION

CAUTION

If it is near or below Low, add enough oil to bring the level to Full.


Do not add engine oil over Full. This may cause engine damage.

6. Make sure the O-ring on the dipstick is positioned properly before reinserting the dipstick.

7. Reinsert the dipstick fully.

image


Engine Compartment Overview

(Page 143)

Engine Compartment Overview ‌Engine oil-filler capEngine oil-filler capEngine oil-filler capBattery Fuse blockBattery Fuse bl...

Engine Coolant

(Page 145)

Engine Coolant ‌WARNINGWARNINGWARNINGqInspecting Coolant LevelDo not use a match or live flame in the engine compartment. DO NOT ADD COOLA

We also have owner's manuals for other vehicle years:

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car Mazda CX-5 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!