AUX/USB/iPod mode

AUX/USB/iPod mode

Audio can be heard from the vehicle's speakers by connecting a commercially- available portable audio unit to the auxiliary jack.

A commercially-available, non-impedance (3.5image ) stereo mini plug cable is required. Contact an Authorized Mazda Dealer for details.

image


Auxiliary jack/USB port


Auxiliary jack/USB port


Auxiliary jack/USB port

In addition, audio can be played from the vehicle audio device by connecting USB device or an iPod to the USB port.


image How to use AUX mode page 5-60

image How to use USB mode (Type

A) page 5-62

image How to use USB mode (Type

B) page 5-66

image How to use iPod mode (Type

A) page 5-70

image How to use iPod mode (Type

B) page 5-74

image



image

WARNING

WARNING

WARNING

Do not adjust the portable audio unit or a similar product while driving the vehicle:

image

CAUTION

CAUTION

CAUTION

Adjusting the portable audio unit or a similar product while driving the vehicle is dangerous as it could distract your attention from the vehicle operation which could lead to a serious accident. Always adjust the portable audio unit or a similar product while the vehicle is stopped.


Ø Always close the auxiliary jack/ USB port lid when it is not in use. If foreign matter or liquid penetrates the auxiliary jack/USB port, it may cause a malfunction.

Ø Depending on the portable audio device, noise may occur when the device is connected to the vehicle accessory socket. (If noise occurs, do not use the accessory socket.)

NOTE

• This mode may not be usable depending on the portable audio device to be connected.

• Before using the auxiliary jack/USB port, refer to the instruction manual for the portable audio device.

• Use a commercially-available, non- impedance (3.5image ) stereo mini plug for connecting the portable audio unit to the auxiliary jack. Before using the auxiliary jack, read the manufacturer's instructions for connecting a portable audio unit to the auxiliary jack.

• To prevent discharging of the battery, do not use the auxiliary input for long periods with the engine off or idling.

• When connecting a device to the auxiliary jack or USB port, noise may occur depending on the connected device. If the device is connected to the vehicle's accessory socket, the noise can be reduced by unplugging it from the accessory socket.


image

USB port Auxiliary jack

USB port Auxiliary jack

USB port Auxiliary jack

How to connect USB port/ Auxiliary jack


Connecting a device

1. Open the console lid.

2. Open the auxiliary jack/USB port lid.

3. Connect the connector on the device to the USB port.

image


Connecting with a connector cable

1. Open the console lid.

2. Open the auxiliary jack/USB port lid.

image

WARNING

WARNING

WARNING

3. Pass the connection plug cord through the cutout of the console and connect the device plug/connector cable to the auxiliary jack/USB port.


Do not allow the connection plug cord to get tangled with the parking brake or the shift lever:

image

CAUTION

CAUTION

CAUTION

Allowing the plug cord to become tangled with the parking brake or the shift lever is dangerous as it could interfere with driving, resulting in an accident.


Do not place objects or apply force to the auxiliary jack/USB port with the plug connected.

NOTE

• Insert the plug to the auxiliary jack/USB port securely.

• Insert or pull out the plug with the plug perpendicular to the auxiliary jack/USB port hole.

• Insert or remove the plug by holding its base.

How to use AUX mode


image

Type A Type B


image image


(Type A)

1. Switch the ignition to ACC or ON.

2. Press the power/volume dial to turn the audio system on.

3. Press the USB/AUX button (image ) of the audio unit to change to the AUX mode.

(Type B)

1. Switch the ignition to ACC or ON.

2. Press the power/volume dial to turn the audio system on.

image

3. Press the audio button ( ) to display the audio screen.

4. Press the image on-screen tab to switch to the AUX mode.

image


NOTE

• When the device is not connected to the auxiliary jack, the mode does not switch to the AUX mode.

• Set the volume of the portable audio unit to the maximum within the range that the sound does not become distorted, then adjust the volume using the power/volume dial of the audio unit or the up/down switch of the audio control switch.

• Audio adjustments other than audio volume can only be done using the portable audio device.

• If the connection plug is pulled out from the auxiliary jack while in AUX mode, noise may occur.

image


qHow to use USB mode (Type A)

Repeat button

image

Random button


Track up/Fast-forward button Track down/Reverse button

Folder up button Folder down button


File dial


USB/AUX button Text button

image

Scan button



Type

Playable data

USB mode

MP3/WMA/AAC file

Playback

1. Switch the ignition to ACC or ON.

2. Press the power/volume dial to turn the audio system on.

3. Press the USB/AUX button (image ) to switch to the USB mode and start playback.

NOTE

• Some devices such as smart phones may require a setting change to allow USB operation.

• When the USB device is not connected, the mode does not switch to USB mode.

• When there is no playable data in the USB device, “NO CONTENTS” is flashed.

• Playback of the USB device is in the order of the folder numbers. Folders which have no MP3/WMA/AAC files are skipped.

• Do not remove the USB device while in the USB mode. The data may be damaged.

Fast-forward/Reverse

image

Press and hold the fast-forward button ( ) to advance through a track at high speed.

Press and hold the reverse button ( ) to reverse through a track at high speed.

image

Track search

image

Press the track up button ( ) or turn the file dial clockwise once to skip forward to the beginning of the next track.

image

Press the track down button ( ) or turn the file dial counterclockwise within a few seconds after playback begins to track down to the beginning of the previous track.

image

Press the track down button ( ) or turn the file dial counterclockwise after a few seconds have elapsed to start playback from the beginning of the current track.

Folder search

image

image

To change to the previous folder, press the folder down button ( ), or press the folder up button ( ) to advance to the next folder.

Music Scan

This function scans the titles in a folder currently being played and plays ten seconds of each song to aid you in finding a song you want to listen to.


image

image

Press the scan button ( ) during playback to start the scan play operation (the track number will flash). Press the scan button ( ) again to cancel scan playback.

NOTE

If the unit is left in scan, normal playback will resume where scan was selected.

Repeat playback (Track repeat)

Press the repeat button (1) during

playback to play the current track repeatedly. “TRACK RPT” is displayed during playback.

Press the repeat button (1) two times while “TRACK RPT” is displayed to cancel.

(Folder repeat)

Press the repeat button (1) two times during playback to repeat the playback of the songs in the current folder. “FOLDER RPT” is displayed during playback.

Press the repeat button (1) while

“FOLDER RPT” is displayed to cancel.

Random playback (Folder random)

Press the random button (2) during

playback to play the tracks in the folder randomly. “FOLDER RDM” is displayed during playback.

Press the random button (2) two times while “FOLDER RDM” is displayed to cancel.

(Media random)

Press the random button (2) two times during playback to play the songs in the USB device randomly. “MEDIA RDM” is displayed during playback.

Press the random button (2) while

“MEDIA RDM” is displayed to cancel.

Switching the display

image

For files with a file name and other information that have been input, the display switches between display of the file name and other information each time the text button ( ) is pressed during playback.


Folder number/File number File number/Elapsed time display

image

File name Folder name Album name Song name Artist name

NOTE

• The information (artist name, music name) is displayed only when the USB device information in the USB device has information which can be displayed on the screen.

• This unit cannot display some characters. Characters which cannot be displayed are indicated by an asterisk (image ).

Display scroll

image

image

Only 9 characters (File name) or 13 characters (Except file name) can be displayed at one time. To display the rest of the characters of a long title, press and hold the text button ( ). The display scrolls the next 13 characters. Press and hold the text button ( ) again after the last 13 characters have been displayed to return to the beginning of the title.

image


NOTE

The number of characters which can be displayed is restricted.

Error Messages

When the message “CHECK USB” is displayed, it indicates that there is some error in the USB device. Verify that the content recorded in the USB device has MP3/WMA/AAC files and re-connect correctly. If the message reappears, have the unit checked by an Authorized Mazda Dealer.

image

MEMO


qHow to use USB mode (Type B)


image

Audio button


Power/Volume dial


Track up/Fast-forward button

Track down/Reverse button

File dial


image

Type

Playable data

USB mode

MP3/WMA/AAC file

Type

Playable data

USB mode

MP3/WMA/AAC file

Type

Playable data

USB mode

MP3/WMA/AAC file

Touch the image on-screen button while


Playback

1. Switch the ignition to ACC or ON.

2. Press the power/volume dial to turn the audio system on.

image

3. Press the audio button ( ) to display the audio screen.

playback is paused to cancel the pause.

Fast-forward/Reverse Operations using audio panel

Press and hold the fast-forward button

image

( ) to advance through a track at high speed.

image

Press and hold the reverse button ( ) to reverse through a track at high speed.

4. Touch the image on-screen tab to switch to USB mode and start playback.

NOTE

• Some devices such as smart phones may require a setting change to allow USB operation.

• When a USB device is not connected to the USB port, the mode does not switch to the USB mode even if the image on-screen tab is touched.

• Do not remove the USB device while in the USB mode. Otherwise, the data could be damaged.

Pause

Touch the image on-screen button to pause playback.

Operations on screen

Touch and hold the image on-screen button to advance through a track at high speed.

Touch and hold the image on-screen button to reverse through a track at high speed.

Track search

Operations using audio panel

image

Press the track up button ( ) or turn the file dial clockwise once to skip forward to the beginning of the next track.

image

Press the track down button ( ) or turn the file dial counterclockwise within a few seconds after playback begins to track down to the beginning of the previous track.

Interior Features

Audio System


image


image

Press the track down button ( ) or turn the file dial counterclockwise after a few seconds have elapsed to start playback from the beginning of the current track.

Operations on screen

Touch the image on-screen button once to skip forward to the beginning of the next track.

Touch the image on-screen button within a few seconds after playback begins to track down to the beginning of the previous track.

Touch the image on-screen button after a few seconds have elapsed to start playback from the beginning of the current track.

Displaying song list

The song list in the USB device can be viewed.

NOTE

The song list may not display depending on the conditions.

(Displaying optional list)

1. Touch the image on-screen button during playback.

2. Touch the category which you want to select. The record list or song list is displayed.

(Displaying a list being played)

Touch the image on-screen button.

NOTE

Press the image on-screen button to display the upper list.

Selecting from list

Select the desired song to play.

1. Press the image on-screen button to select the song list.

2. Touch the song you want to listen to.

image

NOTE

The selected song list becomes the play list.


Repeat playback

image

Touch the on-screen button during playback. “ ” is displayed during playback.

image

Touch the on-screen button two times while “ ” is displayed to cancel.

Shuffle playback

(Shuffling songs in list being played)

image

Touch the on-screen button during playback. “ ” is displayed during playback.

image

Touch the on-screen button two times while “ ” is displayed to cancel.

(Shuffling album in list being played)

Touch the image on-screen button two times during playback. “image ” is displayed during playback.

Touch the image on-screen button while

“image ” is displayed to cancel.

Text scroll

If a whole title cannot be displayed at one time, touch the image on-screen button on the right side of each title. When the last character is displayed, touch the image on- screen button to display the first character of the title.


NOTE

• The image on-screen button is displayed when the whole title is not displayed.

• The information (artist name, music name, album name) is displayed only when the USB device has information which can be displayed on the screen.

• This unit cannot display some characters. Characters which cannot be displayed are indicated by an asterisk (image ).

• The number of characters which can be displayed is restricted.

Error Messages

If the message “USB Error” is displayed, it indicates that there is no playable file in the USB device or there is an error in the USB device. Verify that the content recorded in the USB device has MP3/ WMA/AAC files and re-connect correctly. If the message reappears, have the unit checked by an Authorized Mazda Dealer.

image

MEMO


qHow to use iPod mode (Type A)

image

Random button Category down button

Repeat button Category up button


Track up/Fast-forward button Track down/Reverse button

List up button List down button


File dial


USB/AUX button Text button

image

Scan button


Connectable iPod is as follows:

• iPod: 5G

• iPod classic

• iPod nano: 1/2/3/4/5G

• iPod touch*1: 1/2G

• iPhone*1: 3G/3GS

*1 For only iPod functions

NOTE

The iPod functions on the iPod cannot be operated while it is connected to the unit because the unit controls the iPod functions.

Playback

1. Switch the ignition to ACC or ON.

2. Press the power/volume dial to turn the audio system on.

3. Press the USB/AUX button (image ) to switch to the iPod mode and start playback.

NOTE

• When an iPod is not connected, the mode does not switch to the iPod mode.

• When there is no playable data in the iPod,

“NO CONTENTS” is flashed.

• Do not remove the iPod while in the iPod mode. Otherwise, the data could be damaged.

Fast-forward/Reverse

image

Press and hold the fast-forward button ( ) to advance through a track at high speed.

image

Press and hold the reverse button ( ) to reverse through a track at high speed.

Track search

image

Press the track up button ( ) or turn the file dial clockwise once to skip forward to the beginning of the next track.

image

Press the track down button ( ) or turn the file dial counterclockwise within a few seconds (depends on iPod software version) after playback begins to track down to the beginning of the previous track.

image

Press the track down button ( ) or turn the file dial counterclockwise after a few seconds (depends on iPod software version) have elapsed to start playback from the beginning of the current track.

Category search

Press the category down button (5) to select the previous category and press the category up button (6) to select the next category.

Interior Features

Audio System


image


NOTE

The types of categories include Playlist, Artist, Album, Song, Podcast, Genre, Composer, and Audio book.

List search

image

image

Press the list down button ( ) to select the previous list and press the list up button ( ) to select the next list.

NOTE

When the selected category is Song or Audio book, there is no list.

Music Scan

This function scans the titles in a list currently being played and plays 10 seconds of each song to aid you in finding a song you want to listen to.

image

image

Press the scan button ( ) during playback to start the scan play operation (the track number will flash). Press the scan button ( ) again to cancel scan playback.

NOTE

If the unit is left in scan, normal playback will resume where scan was selected.

Repeat playback

Press the repeat button (1) during playback to repeat the playback of the song in the current list. “TRACK RPT” is displayed during playback.

Press the repeat button (1) while displaying “TRACK RPT” to cancel.

Random playback (Song random)

Press the random button (2) during

playback to play the tracks in the list randomly. “SONG RDM” is displayed during playback.

Press the random button (2) two times while “SONG RDM” is displayed to cancel.

image

(Album random)

Press the random button (2) two times during playback to play the songs in the iPod randomly. “ALBUM RDM” is displayed during playback.

Press the random button (2) while

“ALBUM RDM” is displayed to cancel.

NOTE

The track number being played randomly is in the order of the iPod shuffle table.

Switching the display

image

For files with a file name and other information that have been input, the display switches between display of the file name and other information each time the text button ( ) is pressed during playback.


File number/Elapsed time


Category (Playlist title/Genre title

/Composer title/Podcast title)


image

Artist name


Album name


Song name


NOTE

• The information (artist name, music name) is displayed only when the iPod has information which can be displayed.

• This unit cannot display some characters. Characters which cannot be displayed are indicated by an asterisk (image ).

Display scroll

image

image

13 characters (Except file name) can be displayed at one time. To display the rest of the characters of a long title, press and hold the text button ( ). The display scrolls the next 13 characters. Press and hold the text button ( ) again after the last 13 characters have been displayed to return to the beginning of the title.

NOTE

The number of characters which can be displayed is restricted.

Error Messages

If the message “CHECK iPod” is displayed, it indicates that there is a malfunction in the iPod. Verify that the content recorded in the iPod has playable files and connect correctly. If the message reappears, have the unit checked by an Authorized Mazda Dealer.

image

MEMO


qHow to use iPod mode (Type B)


image

Audio button


Power/Volume dial


Track up/Fast-forward button

Track down/Reverse button

File dial


The connectable iPods are as follows:

• iPod classic

• iPod nano: 4/5/6G

• iPod touch*1: 2/3/4G

• iPhone*1: 3GS/4/4S

*1 Only iPod function

NOTE

The iPod functions on the iPod cannot be operated while it is connected to the unit because the unit controls the iPod functions.

Playback

1. Switch the ignition to ACC or ON.

2. Press the power/volume dial to turn the audio system on.

image

3. Press the audio button ( ) to display the audio screen.

4. Touch the image on-screen tab to switch to the iPod mode and start playback.

NOTE

image

• When the iPod is connected to the USB port, the on-screen tab changes to the on-screen tab.

• Do not remove the iPod while in the iPod mode. Otherwise, the data could be damaged.

Pause

image

Touch the image on-screen button to pause playback. Touch the image on- screen button while playback is paused to cancel the pause.

Fast-forward/Reverse Operations using audio panel

Press and hold the fast-forward button

image

( ) to advance through a track at high speed.

image

Press and hold the reverse button ( ) to reverse through a track at high speed.

Operations on screen

Touch and hold the image on-screen button to advance through a track at high speed.

Touch and hold the image on-screen button to reverse through a track at high speed.

Track search

Operations using audio panel

image

Press the track up button ( ) or turn the file dial clockwise once to skip forward to the beginning of the next track.

Audio System


image


image

Press the track down button ( ) or turn the file dial counterclockwise within a few seconds (depends on iPod software version) after playback begins to track down to the beginning of the previous track.

image

Press the track down button ( ) or turn the file dial counterclockwise after a few seconds (depends on iPod software version) have elapsed to start playback from the beginning of the current track.

Operations on screen

Touch the image on-screen button once to skip forward to the beginning of the next track.

Touch the image on-screen button within a few seconds (depends on iPod software version) after playback begins to track down to the beginning of the previous track.

Touch the image on-screen button after a few seconds (depends on iPod software version) have elapsed to start playback from the beginning of the current track.

Displaying song list

The song list in the iPod can be viewed.

NOTE

The song list may not display depending on the conditions.

(Displaying optional list)

1. Touch the image on-screen button during playback.

2. Touch the category which you want to select. The record list or song list is displayed.

(Displaying a list being played)

Touch the image on-screen button.

NOTE

Press the image on-screen button to display the upper list.

Selecting from list

Select the desired song to play.

1. Press the image on-screen button to select the song list.

2. Touch the song you want to listen to.

NOTE

The selected song list becomes the play list.


Repeat playback

image

Touch the on-screen button during playback. “ ” is displayed during playback.

image

Touch the on-screen button two times while “ ” is displayed to cancel.

Shuffle playback

(Shuffling songs in list being played)

image

Touch the on-screen button during playback. “ ” is displayed during playback.

image

Touch the on-screen button two times while “ ” is displayed to cancel.

(Shuffling album in list being played)

Touch the image on-screen button two times during playback. “image ” is displayed during playback.

Touch the image on-screen button while

“image ” is displayed to cancel.

NOTE

The track number being shuffle played is in the order of the iPod shuffle table.

image


Text scroll

If a whole title cannot be displayed at one time, touch the image on-screen button on the right side of the title to display the whole title. When the last character is displayed, touch the image on-screen button to display the first character of the title.

NOTE

• The image on-screen button is displayed when the whole title is not displayed.

• The information (artist name, music name) is displayed only when the iPod has information which can be displayed on the screen.

• This unit cannot display some characters. Characters which cannot be displayed are indicated by an asterisk (image ).

• The number of characters which can be displayed is restricted.

Error Messages

If the message “iPod Error” is displayed, it indicates that there are no playable files in the iPod or there is a malfunction.

Verify that the content recorded in the iPod has playable files and re-connect correctly. If the message reappears, have the unit checked by an Authorized Mazda Dealer.

Error Indications

If you see an error indication on the display, find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer.


Indication

Cause

Solution

CHECK USB


Verify that the content


recorded in the USB




device has


USB Error

USB device malfunction

MP3/WMA/AAC files and re-connect correctly.

If the error indication



continues to display,



consult an Authorized



Mazda Dealer.

CHECK iPod


Verify that the content


recorded in the iPod has




playable files and


iPod

re-connect correctly.

iPod Error

malfunction

If the error indication

continues to display,



consult an Authorized



Mazda Dealer.

image


Audio Control Switch Operation

(Page 120)

Sound‌Refer to Power/Volume/Display/Sound Controls on page 5-36.Vehicle• Door Locks• Light Control• Wipers Control1. Press the setup button ( )...

Bluetooth®

(Page 122)

Bluetooth®í ‌Bluetooth® Hands-Free outlineWhen a Bluetooth® device (mobile phone) is connected to the vehicle'

We also have owner's manuals for other vehicle years:

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car Mazda CX-5 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!