Audio Set (Type B)

Audio Set (Type B)


Do not press the screen strongly or press it with a sharp-pointed object. Otherwise, the screen could be damaged.


image


image Power/Volume/Display/Sound Controls page 5-36

image Operating the Radio page 5-40

image Operating the Satellite Radio page 5-44

image Operating the Compact Disc (CD) Player page 5-52

image How to use Auxiliary jack/USB port page 5-55

image Error Indications page 5-55

image Setup page 5-55


qPower/Volume/Display/Sound Controls


image

Audio button Phone button Navigation button


Power/Volume dial

Setup button


Audio control dial


Power ON/OFF

Switch the ignition to ACC or ON.

Press the power/volume dial to turn the audio system on. Press the power/volume dial again to turn the audio system off.

Volume adjustment

To adjust the volume, turn the power/ volume dial.

Turn the power/volume dial to the right to increase volume, to the left to decrease it.

Display setting

image

Press the setup button ( ) to display the display setting screen.

Touch the image on-screen tab to select the item you would like to change.

Brightness adjustment

image

: Increase brightness

: Decrease brightness

Contrast adjustment

image

: Higher contrast

: Lower contrast

Tint adjustment*1

image

image

: Green tint enhancement color

: Red tint enhancement color

*1 Adjustment can be performed only while in the rear view camera mode.

Color adjustment*1

image

: To deepen a color

: To fade a color

*1 Adjustment can be performed only while in the rear view camera mode.

Daytime/nighttime screen setting*1

The daytime or nighttime screen can be selected even if the headlights are illuminated or turned off (when bright screen is required at night or dark screen is required at noon).

image

: Daytime screen setting

: Nighttime screen setting

: Switches screen automatically according to headlight illumination condition

*1 The setting cannot be made while in rear view camera mode.

Display OFF

The display can be turned off. Touch the image on-screen button to turn the display off.


The display can be turned back on as follows:

image

• Press the audio button ( ) to display the audio screen.

image

• Press the navigation button ( ) to display the navigation screen.

image

• Press the phone button ( ) to display the Bluetooth® dial screen.

image

• Press the setup button ( ) to display the setup dial setting screen.

• Press the audio control dial to display the setup sound setting screen.

• Shift to the R position to change to the rear view camera mode.

Shift to a position other than R to return to the display off condition.

NOTE

The screen can also be turned off using voice recognition.

Refer to Voice Recognition on page 5-81.


Display setting reset

All of the screen setting values can be reset to their initial settings.

1. Touch the image on-screen button.

2. Touch the image on-screen button.

Audio sound adjustment

Press the audio control dial or touch the image on-screen button to display the sound setting screen.


Indication

Setting value


Bass (Low pitch sound)


image

: Low pitch

enhancement


image

: Low pitch

reduction

Treble (Treble sound)


image

: Treble

enhancement


image

: Treble reduction

Balance (Left/right volume balance)

image

: Right side

volume reduction

image

: Left side

volume reduction

Fader (Front/back volume balance)

image

: Front speaker

volume reduction

image

: Rear speaker

volume reduction

Button Beep (Audio operation sound)


image

: on/off*1


Auto Level Control*2 (Automatic volume adjustment)

image

: Level up

image

: Level down

AudioPilot*3 (Automatic volume adjustment)


image

: on/off


Centerpoint*3 (Automatic surround level adjustment)


image

: on/off


*1 Some functions do not turn off

*2 Standard audio

*3 Bose® Sound System

Automatic Level Control (ALC)

The automatic level control is a feature that automatically adjusts audio volume and sound quality according to the vehicle speed. The volume increases in accordance with the increase in vehicle speed, and decreases as vehicle speed decreases.

image


AudioPilot® 2*4

AudioPilot® 2 automatically adjusts audio volume and sound quality in accordance with the level of noise entering the vehicle interior while driving. When AudioPilot® 2 is turned on, the system automatically calculates the conditions for optimum hearing of sound which may be difficult to hear depending on exterior noise.

AudioPilot® 2 can be set on or off.

*4 AudioPilot® 2 is a registered trademark of Bose Corporation.


Centerpoint®*5

Centerpoint® offers you the experience of 5.1-channel surround sound in your vehicle even with your conventional 2- channel stereo CDs. Centerpoint® can be set on or off.

*5 Centerpoint® is a registered trademark of Bose Corporation.

NOTE

• Centerpoint® operates optimally with a 2- channel stereo CD. Audio files encoded with high compression can be played, however, they may result in poor sound quality.

• Centerpoint® is available for 2-channel stereo audio except for AM radio/FM radio/ AUX/Bluetooth® audio.

Sound setting reset

The settings for bass, treble, balance, and fade can be returned to their initial settings.

1. Touch the image on-screen button.

2. Touch the image on-screen button.

image

MEMO


image

qOperating the Radio


Audio button


Seek tuning buttons



image

Manual tuning dial


Radio ON

(Connected Satellite Radio)

image

Press the audio button ( ) and touch the image on-screen tab.

(Unconnected Satellite Radio)

image

Press the audio button ( ) and touch the image or image on-screen tab.

Band selection

(Connected Satellite Radio)

Touch the image on-screen tab to switch the band as follows:

FM1→FM2→AM

NOTE

image

• is displayed when FM1 is selected, is displayed when FM2 is

selected, and image is displayed when AM is selected.

• If the FM broadcast signal becomes weak, reception automatically changes from STEREO to MONO for reduced noise, and the “STEREO” indicator will no longer display.

(Unconnected Satellite Radio)

image

Touch the on-screen tab to select AM. Touch the on-screen tab to select FM1 and FM2.

NOTE

image

• When FM1 is selected, is displayed. When FM2 is selected, is displayed.

• If the FM broadcast signal becomes weak, reception automatically changes from STEREO to MONO for reduced noise, and the “STEREO” indicator will no longer display.

Tuning

The radio has the following tuning methods: Manual, Seek, Scan, Preset channel, and Auto memory tuning. The easiest way to tune stations is to set them on preset channels.

NOTE

If the power supply is interrupted (fuse blows or the battery is disconnected), the preset channels will be erased.

Manual tuning

Turning the manual tuning dial will change the frequency higher or lower.

NOTE

When an image broadcast is being received, a receivable multicast channel is also received.


Seek tuning

image

image

Pressing the seek tuning button ( , ) will cause the tuner to seek a higher or lower frequency automatically.

NOTE

image

image

• If you continue to press and hold the seek tuning button ( , ) the frequency will continue changing without stopping.

• When an image broadcast is being received, a receivable multicast channel is also received.

Scan tuning

You can search for receivable radio stations by touching the image on-screen button.

Scanning stops at each station for about five seconds.

Touch the image on-screen button one time during reception to continue receiving a broadcasting station.

Preset channel tuning

The six preset channels can be used to store six AM and twelve FM stations.

1. To set a channel, first select AM, FM1, or FM2. Tune to the desired station.

2. Press and hold any of the preset on- screen buttons. The reception frequency is programmed and displayed on the preset button.

3. Repeat this operation for the other stations and bands you want to store. When receiving a programmed frequency, select AM, FM1, or FM2 and touch the preset on-screen button.

NOTE

The programmed frequency is displayed on the preset button.

Auto memory tuning

This is especially useful when driving in an area where the local stations are unknown. Additional AM/FM stations can be stored without disturbing the previously set channels.

1. Touch the image on-screen button. The auto memory preset list is displayed and the previously tuned frequency is received.

2. Touch the image on-screen button to display the frequencies of up to ten radio stations on the auto memory preset list.

3. Touch the desired frequency.

NOTE

Touch the image on-screen button during auto memory tuning to return to the AM/FM main screen.

Radio Broadcast Data System (RBDS) Radio text information display

A maximum of 64 characters of radio text

information sent from a broadcasting station is displayed in the audio display.

NOTE

Radio text information is a function of FM radio. Text information is not displayed in the following:

• During image reception

• Not an RBDS broadcast

• During HD reception

• RBDS broadcast, but radio text is not transmitted from the radio station

image


Genre Seek

Some FM stations transmit Genre codes (Program type like a Rock, News, and so on). This code enables alternative stations transmitting the same Genre code to be found quickly. To select from the genre list, touch the image on-screen button while in the FM mode and the desired Genre Seek.


(To scan for Genre Seek:)

1. Touch the genre type which you want to select.

2. Touch the image ,image on-screen button.

Ex.)

89.3 is currently being received. With Rock selected as the Genre, the radio stations broadcasting Rock are at the following frequencies.

98.3*1, 98.7, 104.3*1, 107.1

*1 Radio stations with good reception The frequency changes as follows each time the Genre Seek on-screen button is pressed.

89.3→98.3→104.3→98.3

NOTE

• Only one Genre can be selected.

• Touch the image on-screen button to return to the FM1 or FM2 main screen.

• It may not be possible to receive any station even if the Genre Seek function is used.

• If a program in the selected genre is not broadcast to a region, reception is not possible even if the Genre Seek function is used.

• The Genre Seek function searches for genre code (program type) which FM analog broadcasts transmit. image specialty programs (HD2-HD8) cannot be searched because they are not FM analog broadcasts.

• If radio stations which are selected by scanning using the Genre Seek function are image broadcasting stations, they are changed from analog broadcasts to

image broadcasts after a few seconds if the reception conditions are good. The genre is displayed after the switch, however, the genre for FM analog broadcasts may differ.

HD Radio

What is HD Radio™ Technology and how does it work?

HD Radio™ Technology is the digital evolution of analog AM/FM radio. Your radio product has a special receiver which allows it to receive digital broadcasts (where available) in addition to the analog broadcasts it already receives. Digital broadcasts have better sound quality than analog broadcasts as digital broadcasts provide free, crystal clear audio. For more information, and a guide to available radio stations and programming, please visit www.hdradio.com.

image


Benefits of HD Radio™ Technology (Information)

The song title, artist name and genre will appear on the screen when available by the radio station.

(Multicast)

On the FM radio frequency most digital stations have “multiple” or supplemental programs on each FM station.

Listening to HD Radio™ Technology

image

If image turns on by selecting a radio station which is an

image

image

broadcasting station, the analog broadcast is switched to an broadcast automatically after a few seconds and then received. For FM, , and for AM, image is displayed, and the illuminates in orange.

If the HD Radio broadcast is stopped and changed to an analog broadcast, press down image to turn off image .

Multicast channel selection (FM)

Press image on-screen button to switch to the multi-cast channel for the displayed number.

The number of multi-cast channels which can be received differs depending on the radio station.

NOTE

• If an analog broadcast is received once and

image is received while HD1 is selected, the audio unit switches to the

image

station automatically.

• When the button is illuminated, there could be a noticeable difference in sound quality and volume when a change from digital to analog signals occurs. If the sound quality and volume become noticeably diminished or cut off, touch the HD button to turn off

image (image button is not illuminated).

• Once an analog broadcast is received when HD1 is selected from the preset channels, it is switched to image automatically. If the radio reception conditions are poor, or image is off, switching to image broadcasts is not possible.

• When an HD specialty channel (HD2 to HD8) is selected from the preset channels, “No HD signal” is displayed and no audio is output until image is received. If the radio reception conditions are poor, “No HD signal” continues to be displayed.

• If the image is not illuminated or does not illuminate in orange, information such as song titles of the image station are received, however, the audio output is analog. If information can no longer be received and the non-reception condition continues, image and image on- screen buttons disappear.

image


image

qOperating the Satellite Radioí


Audio button


Seek tuning buttons



Manual tuning dial


What is satellite radio?

With over 130 channels, SIRIUS Satellite Radio brings you more of what you love. Get channels and channels of commercial- free music, plus sports, news, talk, entertainment and more.

Commercial-free music from nearly every genre ―rock to pop, hip-hop to country, jazz, classical and more. Plus live performances and artist-dedicated channels.

Live sports Play-by-Play & Expert Talk

―every NFL game, every NASCAR® race, 24/7 sports talk, college sports and more.

Exclusive entertainment, comedy and talk ―The biggest names, compelling talk, hilarious comedy.

World-class news plus local traffic and weather.

Sign up for SIRIUS Satellite Radio today!

NOTE

image

Exclusive to Sirius. If your vehicle is equipped with Sirius, your new Mazda includes a free introductory subscription with a limited term trial offer. Call 888-539-7474 to activate. For more information, visit www.siriusxm.com.

Satellite radio is only available in regions providing satellite radio service (some areas of the United States and Canada). Contact Authorized Mazda Dealer for details.

How to Activate Satellite Radio

You must call SIRIUS to activate your service. Activation is free and takes only a few minutes.

SIRIUS service uses an ID code to identify your radio. This code is needed to activate SIRIUS service, and report any problems.


Please have the following information ready:

• SIRIUS ID (12-digit electronic serial no, or ESN*1)

• Valid credit card information (may not be required at initial sign-up)

*1 ESN: Electronic Serial Number


Be sure you are parked outside with a clear view of open sky, you will be instructed to turn on your radio (in SIRIUS mode and tuned to channel 184). Activation typically takes only 2―5 minutes.

Displaying the SIRIUS ID (ESN)

Turn the manual tuning dial and select channel 0 to display the twelve-digit Electronic Serial Number (ESN) for the SIRIUS tuner.

SIRIUS operation

All operations of the satellite radio are conducted by means of the audio unit.

SIRIUS radio mode selection

Touch the image on-screen tab on the audio screen to receive the previously received SIRIUS channel.

image

SIRIUS1

SIRIUS1

SIRIUS1

SIRIUS2

SIRIUS2

SIRIUS2

SIRIUS3

SIRIUS3

SIRIUS3

Every time the image on-screen tab is touched, the bank changes in the order shown below.



NOTE

• SIRIUS1, SIRIUS2 and SIRIUS3: six

stations can be stored in each bank for convenient access to your favorite stations.

• image is displayed when SIRIUS1 is selected, image is displayed when SIRIUS2 is selected, and image is displayed when SIRIUS3 is selected.

Operation in the initial state

It may take some time to start up the equipment when it is in the initial state, when there is a change in the user's subscription condition, when the firmware is updated or when the SIRIUS channel map is changed.

“Updating Channels XXX %” is displayed when the SIRIUS channel map is changed.

If the user contract content is changed, “Subscription Updated” is displayed. When the firmware is updated, the “Updating Receiver” is displayed.

Updating could take as long as a few minutes depending on the geographical area. When the unit is in an initialized state, channel 184 is displayed after the display indicates “Updating Receiver”.

NOTE

Do not perform the following operation while “Updating Channels XXX %”, “Updating Receiver” is displayed. Otherwise, the updating procedure will be canceled.

• Turning off the audio power

• Switching to other modes

• Switching the ignition off


When the SIRIUS mode is switched to another mode, or when the power is turned off, the present channel which is being received is stored as the last channel.

Channel up

image

Turn the manual tuning dial to the right or press the seek up button ( ).

Channel down

image

Turn the manual tuning dial to the left or press the seek down button ( ).

image


NOTE

image

image

The channel is continuously switched to the next or previous channel while the seek tuning button ( , ) is continuously pressed.

Unsubscribed channel

When a channel which has been preset becomes unsubscribed or the current channel being listened to becomes unsubscribed, the following is displayed: “Call 888-539-SIRIUS”

“to subscribe”

NOTE

When the subscription contract is canceled, all of the channels including channel 184 appear as unsubscribed.

Preset channel programming

1. Select the desired channel to be programmed.

2. Long-press any of the preset on-screen buttons.

NOTE

Six stations can be stored in each bank, SIRIUS1, SIRIUS2 and SIRIUS3 for

convenient access to your favorite stations.


Preset channel call-up

Touch the preset on-screen button for the channel which you want to select.

NOTE

In the initial setting, all channels are preset to 184.

Selection from channel list

Receivable channels can be displayed on the channel list screen. You can easily select the channel you want to listen from the list. Each category can be also displayed.

1. Touch the image on-screen button.

2. Touch the channel you want to listen from the list.

NOTE

Currently available channels (including parental locked channels) are all displayed in the list.

(Select from category list)

1. Touch the image on-screen button on the channel list screen.

2. Touch the category name which you want to select from the list.

NOTE

A category can be set only when a channel which belongs to a category is being received.

Scan tuning

Touch the image on-screen button to automatically sample stations. Scanning stops at each station for about five seconds.

To hold a station, touch the image on- screen button again during this interval.

NOTE

Unsubscribed channels, invalid channels, parental lock channels and channel 0 are not subject to the scan, therefore these channels will skip automatically.

Channel number, channel name, category name, artist name, song titles and information display

The information regarding the channel which is currently being received is displayed.

NOTE

If channels have not been subscribed to or parental locked, the channel name, category name, artist name, song title and information is not displayed.

image


Display scroll

Touch the image

on-screen button again

If a whole title cannot be displayed at one time, touch the image on-screen button on the right side of the title. When the last character is displayed, touch the image on- screen button to display the first character of the title.

NOTE

The image on-screen button is displayed only if a whole title cannot be displayed at one time.

Instant replay

This function allows you to rewind and replay the program that you were previously or are currently listening to. When the image on-screen button is touched, playback starts from the beginning of the current program.

When the image on-screen button is touched twice, playback starts from the beginning of the previous program.

Touch and hold the image on-screen button to reverse the program while the button is being pressed.

When the image on-screen button is touched, playback starts from the beginning of the next program.

When the image on-screen button is touched while the last program is being played, the instant replay mode is canceled.

Touch and hold the image on-screen button to fast-forward the program while the button is being pressed.

When touching and holding the button until the end of the program, the instant replay mode is canceled.

Instant replay (PAUSE)

If the image on-screen button is touched, instant replay mode is turned on in a paused condition (PAUSE).

to resume playback from the point at which it was paused.

Parental lock

Parental lock, parental unlock, parental lock code change, and parental lock code reset can be set.

NOTE

• Touch the image on-screen button during all the settings to return to the previous display.

• Touch the image on-screen button during the code and master code input to delete an input number.

• If only a four-digit code or master code is input, “Done” can be selected.

• If the registered code has been forgotten, reset the code in “Initialize Parental Code” to [0000].

Parental lock

If a channel is locked, the channel is muted.

1. Turn the manual tuning dial to select the desired channel.

2. Touch the image on-screen button to display the settings screen.

3. Touch the image on-screen button to display the parental lock settings screen.

4. “Input Parental Code” is displayed, and input of the registered code is possible. To enter a number, use the numerical keypad.

5. After inputting the four digits, touch the image on-screen button to confirm the four digits.

image


6. If the four digits match the registered code, “Channel XXX locked” appears and mute is turned on. If they do not match the registered code, “Wrong code” appears and then the display returns to “Input Parental Code”.

Parental unlock

Channels locked using the parental lock function can be unlocked.

1. Select a channel to be unlocked by turning the manual tuning dial.

2. Touch the image on-screen button to display the settings screen.

3. Touch the image on-screen button to display the parental unlock settings screen.

4. “Input Parental Code” is displayed, and input of the registered code is possible. To enter a number, use the numerical keypad.

5. After inputting the four digits, touch the image on-screen button to confirm the four digits.

6. If the four digits match the registered code, “Channel XXX unlocked” appears and mute is canceled. If they do not match the registered code, “Wrong code” appears and then the display returns to “Input Parental Code”.

Parental-lock code change

When changing the code, the new code is input after the previous one is input first.

1. Touch the image on-screen button to display the settings screen.

2. Touch the image on-

screen button to display the code change screen.

3. “Enter Current Code” is displayed, and input of the registered code is possible. To enter a number, use the numerical keypad.

4. After inputting the four digits, touch the image on-screen button to confirm the four digits.

5. If the four digits match the registered code, “Enter New Code” is displayed. If they do not match the registered code, “Wrong code” appears and then the display returns to “Enter Current Code”. To enter a number, use the numerical keypad.

6. After inputting the four digits, touch the image on-screen button to confirm the four digits.

7. “Code changed” appears to indicate that the new code input has been completed.

8. The display returns to its normal display.

NOTE

Channels locked before changing the code remain after changing the code. To unlock a channel, input the changed code.

Parental-lock code reset

If the registered code has been forgotten, reset the code to the default [0000] code.

1. Touch the image on-screen button to display the settings screen.

2. Touch the image on-

screen button to display the code initial screen.

3. “Enter Master Code” is displayed, and input of the registered code is possible. To enter a number, use the numerical keypad.

image


NOTE

Master code:

The Master Code is used to initialize or re- initialize the code in the event that the code is not set to [0000] and/or the personalized code is not known. The initialization process resets the code to [0000]. The master code can potentially defeat the intent of the security of the parental lock if it is located by persons not authorized by the owner to access certain channels.

SIRIUS Satellite Radio Master Code: [0913]


4. After inputting the four digits, touch the image on-screen button to confirm the four digits.

5. If the four digits match the master code, “Code initialized” appears. If they do not match the master code, “Wrong code” appears and the display returns to “Enter Master Code”.

6. The code returns to the default [0000] code.

image

Seek alert

The song title and artist name for the song currently being listened to, and team names at the sports game currently being listened to can be recorded as favorites.

The user is notified when a program begins which has favorites-related information recorded.

Selection from seek alert program list

Select the station you want to listen to from the list to receive the program. Touch the image on-screen button to return to the receiving screen.

Storing songs, artists, and sports team names

NOTE

• A maximum of 10 songs, artists, and sports team names each can be stored.

• If the song title, artist name, sports team name cannot be displayed, “No available items for this program” is displayed.

• Even if the song title, and artist name are displayed in the main screen, it may not be possible to record information for old songs.

• If a song name is stored, the song seek function is turned on.

• If an artist name is stored, the artist seek function is turned on.

• If a sports team name is stored, the game alert function is turned on.

1. Touch the image on-screen button to display the current song and artist names currently being received. The sports team name is displayed while the sports program is being received.

2. Select the item you want to store from song title, artist name and sports team name.

3. “XXXXX (song, artist, sports team name) stored” is displayed.

NOTE

If there is not enough available storage space, “Song Memory Full” or “Artist Memory Full” or “Team Memory Full” and “Delete one to store new one” are displayed. Delete from the list.

image


Seek alert setting

On or off switching to song seek, artist seek, or game alert function, and deletion of stored information can be performed. Touch the image on-screen button and the image on-screen button. Touch the button you want to change from image , image , or image .

(On or off switching)

Touch the image , image , and image on-screen button.

(Deletion)

1. Select song title, artist name, or sports team name that you want to delete from the list.

2. Touch the image on-screen button to display “XXXXX (song, artist, sports team name) deleted”.

image

MEMO


qOperating the Compact Disc (CD) Player


CD slot


image

CD eject button Audio button


Track up/Fast-forward button

Track down/Reverse button

File dial



Type

Playable data


Music/MP3/WMA/ AAC CD player

• Music data (CD-DA)

• MP3/WMA/AAC file

NOTE

If a disc has both music data (CD-DA) and MP3/WMA/AAC files, playback of the two or three file types differs depending on how the disc was recorded.

Inserting the CD

Insert the CD into the slot, label-side up. The auto-loading mechanism will set the CD and begin play.

NOTE

There will be a short lapse before play begins while the player reads the digital signals on the CD.

Ejecting the CD

image

Press the CD eject button ( ) to eject the CD.

Playback

image

Press the audio button ( ) or image on-screen tab with a CD inserted.


Pause

image

To pause playback, touch the image on- screen button.

Touch the image on-screen button during a pause to cancel it.

Fast-forward/Reverse Operations using audio panel

Press and hold the fast-forward button

image

( ) to advance through a track at high speed.

image

Press and hold the reverse button ( ) to reverse through a track at high speed.

Operations on screen

Touch and hold the image on-screen button to advance through a track at high speed.

Touch and hold the image on-screen button to reverse through a track at high speed.


Track search

Operations using audio panel

image

Press the track up button ( ) or turn the file dial clockwise once to skip forward to the beginning of the next track.

image

Press the track down button ( ) or turn the file dial counterclockwise within a few seconds after playback begins to track down to the beginning of the previous track.

image

Press the track down button ( ) or turn the file dial counterclockwise after a few seconds have elapsed to start playback from the beginning of the current track.

Operations on screen

Touch the image on-screen button once to skip forward to the beginning of the next track.

Touch the image on-screen button within a few seconds after playback begins to track down to the beginning of the previous track.

Touch the image on-screen button after a few seconds have elapsed to start playback from the beginning of the current track.

Displaying file list

The desired file list in the CD can be viewed.

During music CD playback

Touch the image on-screen button to display the track list in the CD.

During MP3/WMA/AAC CD playback (Viewing file list in desired folder)

1. Touch the image on-screen button to display the folder list in the CD.

2. Touch the folder which you want to select.

(Viewing file list of current folder)

Touch the image on-screen button.

Selecting file/track

Select the file/track you want to play.

During music CD playback

1. Touch the image on-screen button to display the track list in the CD.

2. Touch the track you want to play.

During MP3/WMA/AAC CD playback

NOTE

Press the image on-screen button on the file list screen to display the list of folders.

(Selection from all folders in CD)

1. When the image on-screen button is touched, the folder list in the CD is displayed.

2. Select the folder name from the displayed list.

3. The files in the selected folder are displayed.

4. Select the file you want to play.

(Selection from inside folder in which a song is currently being played)

1. Press the image on-screen button to select the song list.

2. Touch the song you want to listen to.

image


Music scan

During music CD playback

This function scans the titles on a CD and plays 10 seconds of each song to aid you in finding a song you want to listen to.

1. Touch the image on-screen button during playback to play 10 seconds of each subsequent track starting from the next song.

2. Touch the image on-screen button during playback of the song you want to listen to and continue the playback from that point.

During MP3/WMA/AAC CD playback

This function scans the titles in a folder currently being played and plays 10 seconds of each song to aid you in finding a song you want to listen to.

1. Touch the image on-screen button during playback to play 10 seconds of each subsequent track starting from the next song.

2. Touch the image on-screen button during playback of the song you want to listen to and continue the playback from that point.

NOTE

• If the unit is left in scan, normal playback will resume where scan was selected.

• If all the tracks are scanned, the unit will resume normal playback.

Repeat playback

During music CD playback

Touch the image on-screen button during playback to play the song currently being played repeatedly.“image ” is displayed during playback.

Touch the image on-screen button while

“image ” is displayed to cancel.

During MP3/WMA/AAC CD playback (Track repeat)

Touch the image on-screen button to play the song during playback repeatedly. “image ” is displayed during playback.

image

Touch the on-screen button two times while “ ” is displayed to cancel. (Folder repeat)

Touch the image on-screen button two times to play the songs in the folder repeatedly. “image ” is displayed during playback.

Touch the image on-screen button while

“image ” is displayed to cancel.

Shuffle playback

During music CD playback

Touch the image on-screen button during playback to play the songs in the CD shuffle. “image ” is displayed during playback.

Touch the image on-screen button while

“image ” is displayed to cancel.

During MP3/WMA/AAC CD playback (Folder shuffle)

Touch the image on-screen button during playback to play the songs in the folder shuffle. “image ” is displayed during playback.

image

Touch the on-screen button two times while “ ” is displayed to cancel. (CD shuffle)

Touch the image on-screen button two times during playback to play the songs in the CD shuffle. “image ” is displayed during playback.

Touch the image on-screen button while

“image ” is displayed to cancel.

image


Display scroll

If a whole title cannot be displayed at one time, touch the image on-screen button on the right side of the title. When the last character is displayed, touch the image on- screen button to display the first character of the title.

NOTE

• The image on-screen button is displayed only if a whole title cannot be displayed at one time.

• The information viewable in the display is only CD information (such as artist name, song title) which has been recorded to the CD.

• This unit cannot display some characters. Characters which cannot be displayed are indicated by an asterisk (image ).

• The number of characters which can be displayed is restricted.

Message Display

If “CD Error” is displayed, it means that there is some CD malfunction. Check the CD for damage, dirt, or smudges, and then properly reinsert. If the message appears again, take the unit to an Authorized Mazda Dealer for service.

How to use Auxiliary jack/USB port

Audio can be heard from the vehicle's speakers by connecting a commercially- available portable audio unit to the auxiliary jack.

Use a commercially-available, non- impedance (3.5image ) stereo mini plug cable. Contact an Authorized Mazda Dealer for details.

In addition, audio can be played from the vehicle audio device by connecting a USB device or an iPod to the USB port.

Refer to AUX/USB/iPod mode on page 5-58.


Error Indications

If you see an error indication on the display, find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer.


Indication

Cause

Solution


CD

Error


CD is inserted upside down

Insert the CD properly. If the error indication continues to display, consult an Authorized Mazda Dealer.


CD is defective

Insert another CD properly. If the error indication continues to display, consult an Authorized Mazda Dealer.


Setup

You can customize settings in the setup display as follows:

Display

Refer to Power/Volume/Display/Sound Controls on page 5-36.

image


Audio Set (Type A)

(Page 118)

Audio Set (Type A) ‌ Power/Volume/Sound Controls page 5-26 Operating the Radio ...

Audio Control Switch Operation

(Page 120)

Sound‌Refer to Power/Volume/Display/Sound Controls on page 5-36.Vehicle• Door Locks• Light Control• Wipers Control1. Press the setup button ( )

We also have owner's manuals for other vehicle years:

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car Mazda CX-5 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!