Audio Set (Type A)

Audio Set (Type A)


image

image Power/Volume/Sound Controls page 5-26

image Operating the Radio page 5-28

image Operating the Compact Disc (CD) Player page 5-30

image How to use auxiliary jack/USB port page 5-33

image Error Indications page 5-33


qPower/Volume/Sound Controls



image

image

Power/Volume dial Audio control dial


Power ON/OFF

Indication

Setting value

Turn Left

Turn Right


(Automatic volume adjustment)


Level decrease


Level increase


(Low pitch sound)

Decrease bass

Increase bass


(Treble sound)

Decrease treble

Increase treble


(Front/back volume balance)

Shift the sound to the front

Shift the sound to the rear


(Left/right volume balance)

Shift the sound to the left

Shift the sound to the right


(Audio operation sound)


Off


On

Indication

Setting value

Turn Left

Turn Right


(Automatic volume adjustment)


Level decrease


Level increase


(Low pitch sound)

Decrease bass

Increase bass


(Treble sound)

Decrease treble

Increase treble


(Front/back volume balance)

Shift the sound to the front

Shift the sound to the rear


(Left/right volume balance)

Shift the sound to the left

Shift the sound to the right


(Audio operation sound)


Off


On

Indication

Setting value

Turn Left

Turn Right


(Automatic volume adjustment)


Level decrease


Level increase


(Low pitch sound)

Decrease bass

Increase bass


(Treble sound)

Decrease treble

Increase treble


(Front/back volume balance)

Shift the sound to the front

Shift the sound to the rear


(Left/right volume balance)

Shift the sound to the left

Shift the sound to the right


(Audio operation sound)


Off


On

Switch the ignition to ACC or ON. Press the power/volume dial to turn the audio system on. Press the power/volume dial again to turn the audio system off.

Volume adjustment

To adjust the volume, turn the power/ volume dial. Turn the power/volume dial to the right to increase volume, to the left to decrease it.

Audio sound adjustment

1. Press the audio control dial to select the function. The selected function will be indicated.

2. Turn the audio control dial to adjust the selected functions as follows:


image


image



image



image


image


image


NOTE

About 5 seconds after selecting any mode, the volume function will be automatically selected. To reset bass, treble, fade, and balance, press the audio control dial for 2 seconds. The unit will beep and β€œCLEAR” will be displayed.

Automatic Level Control (ALC)

The automatic level control (ALC) changes the audio volume automatically according to the vehicle speed. The faster the vehicle speed, the higher the volume increases. ALC has ALC OFF and ALC LEVEL 1 to 7 modes. At ALC LEVEL 7,

the amount that the volume can increase is at the maximum. Select the mode according to the driving conditions.

image


qOperating the Radio


image

Seek tuning buttons Channel preset buttons



Scan button Manual tuning/Audio control dial

Band selector buttons Auto memory button


Radio ON

image

Press a band selector button ( ) to turn the radio on.

Band selection

image

Successively pressing the band selector button ( ) switches the bands as follows: FM1β†’FM2β†’AM.


The selected mode will be indicated. If FM stereo is being received, β€œST” will be displayed.

NOTE

If the FM broadcast signal becomes weak, reception automatically changes from STEREO to MONO for reduced noise, and the β€œST” indicator will go out.

Tuning

The radio has the following tuning methods: Manual, Seek, Scan, Preset channel, and Auto memory tuning. The easiest way to tune stations is to set them on preset channels.

NOTE

If the power supply is interrupted (fuse blows or the battery is disconnected), the preset channels will be erased.

Manual tuning

image

Turning the manual tuning dial will change the frequency higher or lower.

Seek tuning

image

image

Pressing the seek tuning button ( , ) will cause the tuner to seek a higher or lower frequency automatically.

NOTE

image

image

If you continue to press and hold the seek tuning button ( , ), the frequency will continue changing without stopping.

Scan tuning

image

image

Press the scan button ( ) to automatically sample strong stations. Scanning stops at each station for about 5 seconds. To hold a station, press the scan button ( ) again during this interval.

Preset channel tuning

The 6 preset channels can be used to store 6 AM and 12 FM stations.

1. To set a channel first select AM, FM1, or FM2. Tune to the desired station.


2. Depress a channel preset button for about 2 seconds until a beep is heard. The preset channel number or station frequency will be displayed. The station is now held in the memory.

3. Repeat this operation for the other stations and bands you want to store. To tune one in the memory, select AM, FM1, or FM2 and then press its channel preset button. The station frequency or the channel number will be displayed.

Auto memory tuning

This is especially useful when driving in an area where the local stations are not known.


Press and hold the auto memory button

image

( ) for about 2 seconds until a beep is heard; the system will automatically scan and temporarily store up to 6 stations with the strongest frequencies in each selected band in that area.


image

After scanning is completed, the station with the strongest frequency will be tuned and its frequency displayed. Press and release the auto memory button ( ) to recall stations from the auto-stored stations. One stored station will be selected each time; its frequency and channel number will be displayed.

NOTE

If no stations can be tuned after scanning operations, β€œA” will be displayed.

image


qOperating the Compact Disc (CD) Player

image

Random button


Load button

Repeat button

CD slot

CD eject button


Track up/Fast-forward button Track down/Reverse button

Folder up button Folder down button


File dial


CD play button Text button

image

Scan button



Type

Playable data


Music/MP3/WMA/ AAC CD player

β€’ Music data (CD-DA)

β€’ MP3/WMA/AAC file

NOTE

If a disc has both music data (CD-DA) and MP3/WMA/AAC files, playback of the two or three file types differs depending on how the disc was recorded.

Inserting the CD

Insert the CD into the slot, label-side up. The auto-loading mechanism will set the CD and begin play.

NOTE

There will be a short lapse before play begins while the player reads the digital signals on the CD.

Ejecting the CD

image

Press the CD eject button ( ) to eject the CD.

Playback

image

Press the CD play button ( ) to start play when a CD is in the unit. If a CD is not in the unit when the CD play button

image

( ) is pressed, β€œNO DISC” will flash on and off.

NOTE

image

When the load button ( ) is pressed, the CD will load and play.

Fast-forward/Reverse

image

Press and hold the fast-forward button ( ) to advance through a track at high

image

speed. Press and hold the reverse button ( ) to reverse through a track at high speed.

Track search

image

Press the track up button ( ) or turn the file dial clockwise once to skip forward to the beginning of the next track.

image

Press the track down button ( ) or turn the file dial counterclockwise within a few seconds after playback begins to track down to the beginning of the previous track.

image

Press the track down button ( ) or turn the file dial counterclockwise after a few seconds have elapsed to start playback from the beginning of the current track.


Folder search (during MP3/WMA/AAC CD playback)

image

image

To change to the previous folder, press the folder down button ( ), or press the folder up button ( ) to advance to the next folder.

Music scan

During music CD playback

This function scans the titles on a CD and plays 10 seconds of each song to aid you in finding a song you want to listen to.

image

image

Press the scan button ( ) during playback to start the scan play operation (the track number will flash). Press the scan button ( ) again to cancel scan playback.

During MP3/WMA/AAC CD playback

image

This function scans the titles in a folder currently being played and plays 10 seconds of each song to aid you in finding a song you want to listen to. Press the scan button ( ) during playback to start the scan play operation (the track number will flash).

image

Press the scan button ( ) again to cancel scan playback.

NOTE

If the unit is left in scan, normal playback will resume where scan was selected.

Repeat playback

During music CD playback

Press the repeat button (1) during playback to repeat the playback of the current song. β€œTRACK RPT” is displayed during playback.

Press the repeat button (1) while displaying the β€œTRACK RPT” to cancel.

During MP3/WMA/AAC CD playback (Track repeat)

Press the repeat button (1) during playback to repeat the playback of the current song. β€œTRACK RPT” is displayed during playback.

Press the repeat button (1) two times while displaying the β€œTRACK RPT” to cancel.


(Folder repeat)

Press the repeat button (1) two times during playback to repeat the playback of the current song in the folder. β€œFOLDER RPT” is displayed during playback.

Press the repeat button (1) while displaying β€œFOLDER RPT” to cancel.

Random playback

During music CD playback

Press the random button (2) during playback to play the tracks in the CD randomly. β€œDISC RDM” is displayed during playback.

Press the random button (2) while displaying β€œDISC RDM” to cancel.

During MP3/WMA/AAC CD playback (Folder random)

Press the random button (2) during playback to play the tracks in the folder randomly. β€œFOLDER RDM” is displayed during playback.

Press the random button (2) two times while displaying β€œFOLDER RDM” to cancel.

image


(CD random)

Press the random button (2) two times during playback to play the songs on the CD randomly. β€œDISC RDM” is displayed during playback.

Press the random button (2) while displaying β€œDISC RDM” to cancel.

Switching the display

image

For files with a file name and other information that have been input, the display switches between display of the file name and other information each time the text button ( ) is pressed during playback.

Music CD (If CD-TEXT capable)


image

Track number/Elapsed time Track name

Album name


Artist name

MP3/WMA/AAC CD


File number/Elapsed time


Folder number/File number


image

File name


Folder name Album name Song name Artist name

NOTE

β€’ The information viewable in the display is only CD information (such as artist name, song title) which has been recorded to the CD.

β€’ This unit cannot display some characters. Characters which cannot be displayed are indicated by an asterisk (image ).

Display scroll

image

image

Only 9 characters (File name) or 13 characters (Except file name) can be displayed at one time. To display the rest of the characters of a long title, press and hold the text button ( ). The display scrolls the next 13 characters. Press and hold the text button ( ) again after the last 13 characters have been displayed to return to the beginning of the title.

image


NOTE

The number of characters which can be displayed is restricted.

Message display

If β€œCHECK CD” is displayed, it means that there is some CD malfunction. Check the CD for damage, dirt, or smudges, and then properly reinsert. If the message appears again, take the unit to an Authorized Mazda Dealer for service.


How to use Auxiliary jack/USB port

Audio can be heard from the vehicle's speakers by connecting a commercially- available portable audio unit to the auxiliary jack.

Use a commercially-available, non- impedance (3.5image ) stereo mini plug cable. Contact an Authorized Mazda Dealer for details.

In addition, audio can be played from the vehicle audio device by connecting a USB device or an iPod to the USB port.

Refer to AUX/USB/iPod mode on page 5-58.


Error Indications

If you see an error indication on the display, find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer.


Indication

Cause

Solution


CHECK CD

CD is inserted upside down

Insert the CD properly. If the error indication continues to display, consult an Authorized Mazda Dealer.


CD is defective

Insert another CD properly. If the error indication continues to display, consult an Authorized Mazda Dealer.

image

MEMO


image

CAUTION

CAUTION

CAUTION

Operating Tips for Audio System

(Page 117)

Antenna ‌‌‌qType AΓ­CAUTIONCAUTIONCAUTIONThe antenna is embedded into the window glass.When washing the inside of the window...

Audio Set (Type B)

(Page 119)

Audio Set (Type B) ‌Do not press the screen strongly or press it with a sharp-pointed object. Otherwise, the screen cou

We also have owner's manuals for other vehicle years:

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car Mazda CX-5 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!